1. Tamio Arai（Shibaura Institute of Technology）
   Development of Automatic Assembly Systems based on Fundamental Analysis of Assembly Processes
2. Takuya Kondo（Toyota Motor Corporation）
   Research and development of advanced materials for automotive parts and systems application
3. Toshio Fukuda（Meijo University）
   Research on Intelligent Robotics, Micro and Nano Robotics and International Contribution

1. New Combination Washing Approach of Chemical Interface Controlled Dispersion and High-Speed Shearing Washing Techniques for Radioactive Contaminated Soil (First Report of Field Test in Fukushima)
   Shintaro ISHIYAMA (Japan Atomic Energy Agency)
   Masatake KAMITANI (MAKINO Corporation)
   Mitsunori KONDO (MAKINO Corporation)
2. Combined Pressure-/Temperature-Sensitive Paint Arranged in Dot Array
   Tomohiro KAMEYA (Nagoya University)
   Yu MATSUDA (Nagoya University)
   Yasuhiro EGAM (Aichi Institute of Technology)
   Hiroki YAMAGUCHI (Nagoya University)
   Tomohide NIIMI (Nagoya University)
3. Experimental and Analytical Studies on Contact Irreversible Electroporation for Superficial Tumor Treatment
   Kosaku KURATA (Kyushu University)
   Ryo UENO (Kyushu University)
   Masahiro MATSUSHITA (Kyushu University)
   Takanobu FUKUNAGA (Kyushu University)
   Hiroshi AKAMATSU (Kyushu University)
4. Toughening of Low-Carbon Steel by Ultrafine-Grained Structure
   Tadanobu INOUE (National Institute for Materials Science)
   Yuuji KIMURA (National Institute for Materials Science)

5. Damage Measurement of Structural Material by Electron Backscatter Diffraction (Quantification of Measurement Quality toward Standardization of Measurement Procedure)

   Masayuki KAMAYA ( Institute of Nuclear Safety System, Inc.)

6. Evaluation of transverse crack initiation in interlaminar toughened CFRP cross-ply laminates under cyclic loading

   Hiroyuki KAWADA (Waseda University)
   Masaki SOGA (Waseda University)
   Ko SHIGEMORI (Waseda University)
   Atsushi HOSOI (Nagoya University)
   Yuzo FUJITA (Toray Industries, Inc.)

7. On Adhesion Type Micro Manipulator with Thermal Control of Capillary Force

   Osamu NAKABEPPU (Meiji University)
   Tatsuhiko KATO (Meiji University)
   Masayuki SHINYA (Meiji University)

8. Numerical Study of Liquid Fuel / Cavitation Bubble Mixture Injection Technique

   Ryo MASUDA (Toyota Central R&D Labs., Inc.)
   Kiyomi KAWAMURA (Toyota Central R&D Labs., Inc.)
   Makoto NAGAOKA (Toyota Central R&D Labs., Inc.)
   Masahiko MASUBUCHI (TOYOTA MOTOR CORPORATION)
   Keisuke KOMORII (TOYOTA MOTOR CORPORATION)

9. Correlation between Flow Accelerated Corrosion and Wall Shear Stress Downstream from an Orifice

   Yoichi UTANOHARA (Institute of Nuclear Safety System, Inc.)
   Yukinori NAGAYA (The Kansai Electric Power Co., Inc.)
   Akira NAKAMURA (Institute of Nuclear Safety System, Inc.)
   Michio MURASE (Institute of Nuclear Safety System, Inc.)
   Koichi KAMAHORI (Institute of Nuclear Safety System, Inc.)

10. A Direct Discretization Approach near Wall Boundaries for a Cartesian Grid Method (Consideration of Consistency between Velocity and Pressure Fields)

    Norikazu SATOI (Toyota Central R&D Labs., Inc.)
    Takeo KAJISHIMA (Osaka University)
    Shintaro TAKEUCHI (Osaka University)
    Masahide INAGAKII (Toyota Central R&D Labs., Inc.)
    Nariaki HORINOUCHI (Toyota Central R&D Labs., Inc.)

11. Experimental Evaluation of Triple-Stage-Actuator System with Thermal Actuator for Hard Disk Drives

    Takenori ATSUMI (HGST Japan, Ltd.)
    Shigeo NAKAMURA (HGST Japan, Ltd.)
    Masaki ODAI (Hitachi, Ltd.)
    Irizo NANIWA (HGST Japan, Ltd.)

12. Modeling Techniques of Deployable Meandering Tubes

    Sachiko ISHIDA (Meiji University)
    Taketoshi NOJIMA (Meiji University)
    Ichiro HAGIWARA (Meiji University)

13. Field Test of the Back Support Muscle Suit (Application in the Material Handling Field)

    Chie SATO (Amazon Japan Logistics K.K.)
    Juji YOKOYA (Amazon Japan Logistics K.K.)
    Hiromi WATANABE (Amazon Japan Logistics K.K.)
    Hideyuki UMEHARA (Tokyo University of Science)
    Hiroki NAKAMURA (Tokyo University of Science)
    Hiroshi KOBAYASHI (Tokyo University)

14. Tire vibration analysis for radial direction on contact and rolling condition

    Masami MATSUBARA (Doshisha University)
    Nobutaka TSUJIUCHI (Doshisha University)
    Takayuki KOIZUMI (Doshisha University)
    Yuya HIRANO (Doshisha University)

15. Measurement Error of Kinetic Friction Coefficient Generated by Frictional Vibration

    Naohiro KADO (Yokohama National University)
    Chiharu TADOKORO (Yokohama National University)
    Ken NAKANO (Yokohama National University)

16. Creation of Hydroxyapatite Film on Human Enamel Utilized Powder Jet Deposition

    Kei SATO (Tohoku University)
    Chihiro NISHIKAWA (Tohoku University)
    Takayuki HAGIWARA (Tohoku University)
    Keita SHIMADA (Tohoku University)
    Wataru HORIUCHI (Yamase Electric Co., Ltd.)
    Ken MATSUMURA (Tohoku University)
    Ryo AKATSUKA (Tohoku University)
    Keiichi SASAKI (Tohoku University)
    Tsutomu ISHIZAKI (SANGI Co., Ltd.)
    Tadayoshi ARAKAWA (SANGI Co., Ltd.)
    Kazushi OHTA (SANGI Co., Ltd.)
    Masayoshi MIZUTANI (Tohoku University)
    Tsunemoto KURIYAGAWA (Tohoku University)

1. 酸素燃焼を適用したゼロエミッション微粉炭火力の開発と商用火力での実証
   氣駕 尚志 ((株)ＩＨＩ)
   三澤 信博 (電源開発(株))
   伊藤 正紀 (電源開発(株))
   山田 敏彦 ((株)ＩＨＩ)
   須田 俊之 ((株)ＩＨＩ)
2. External-Noise Reduction Technologies for Series E5 and E6 Shinkansen Trains
   Takeshi KURITA (East Japan Railway Company)
   Satoru AKIYAMA (Kawasaki Heavy Industries, Ltd.)
   Yasushi TAKANO (Hitachi, Ltd.)
   Shinji NAKAJIMA (Toyo Electric Mfg. Co., Ltd.)
   Toshio SHIKAMA (Koshin Seikosho, Ltd.)
3. 小型・薄型・軽量なＭＥＭＳ ３軸触覚センサの開発
   下山 勲 (東京大学)
   中井 亮仁 (東京大学)
   高橋 英俊 (東京大学)
   永野 顕法 (タッチエンス(株))
   木鋪 大樹 (タッチエンス(株))
4. Development of pressure wave mitigation technique by using microbubbles to realize mercury target for high power pulsed spallation neutron source
   Masatoshi Futakawa (J-PARC Center, JAEA)
   Katsuhiro Haga (J-PARC Center, JAEA)
   Hiroyuki Kogawa (J-PARC Center, JAEA)
   Takashi Wakui (J-PARC Center, JAEA)
   Takashi Naoe (J-PARC Center, JAEA)
5. 静電容量型フレキシブル触覚フィルム
   水島 昌徳 ((株)オーギャ)
   高木 茂王 ((株)オーギャ)
   板野 弘道 ((株)オーギャ)
   水島英吏子 ((株)オーギャ)
6. High-Performance Stability Control Technologies for Mining Trucks
   Toshimichi Minowa (Hitachi Construction Machinery Co., Ltd.)
   Tomohiko Yasuda (Hitachi Construction Machinery Co., Ltd.)
   Toshikazu Minoshima (Hitachi Construction Machinery Co., Ltd.)
   Shinjiro Saito (Hitachi Construction Machinery Co., Ltd.)
   Masanori Ichinose (Hitachi Research Lab. Hitachi, Ltd.)
7. Design Method for Optimizing Contact Ratio of Hypoid Gears
   Hiromi Miyamura (Toyota Motor Corporation)
   Yoshikatsu Shibata (Toyota Motor Corporation)
   Mizuho Inagaki (Toyota Central R&D Labs., Inc.)
   Takayuki Aoyama (Toyota Central R&D Labs., Inc.)

1. Investigation of Blood Sucking Mechanism of a Female Mosquito for Bio-mimetic Application
   Kenji KIKUCHI(Tohoku University)
2. Model for Rheological Properties of Biological Tissue and Control Method of Medical Robot
   Yo Kobayashi (Waseda University)
3. Swimming Mechanism of Microorganisms Revealed by the Three Dimensional Microscopy and Numerical Analysis
   NAKAI Tonau(Tottori University)
4. Measurement of Biomechanical Properties of Actin Stress Fibers
   MATSUI Tsubasa S. (Nagoya Institute of Technology)
5. Fabric product recognition and manipulation by automated intelligent machinery
   Kimitoshi Yamazaki(Shinshu University)
6. Estimation of three-dimensional residual stresses using X-ray diffraction
   Masaru Ogawa(Yokohama National University)
7. Study on the bucking analyses of flexible structural materials and the mechanical characteristics along with their large deformations
   Hiro Tanaka(The University of Tokyo)
8. Study on Residual Stress Detection in Bone Tissue
   Satoshi YAMADA(Hokkaido University)
9. Development of Three-dimensional Transient Two-phase Flow measurement sensors in Rod Bundle
   Takahiro Arai(Central Research Institute of Electric Power Industry)
10. A Study of Film Formation and Particle Production by using Spray Combustion Technology
    OSHIMA Motohiro(Toyama Prefectural University)
11. Experimental and Theoretical Study on Flow Dynamics of DNA at Nanoscale
    Satoshi Uehara(Institute of Fluid Science, Tohoku University)
12. Study on supersonic microjet and its medical applications
    Yoshiyuki TAGAWA(Tokyo University of Agriculture and Technology)
13. Study on Radiative Property, Radar Reflectivity and Collision Growth of Droplets Dispersed in Turbulent Flows
    Keigo MATSUDA(Japan Agency for Marine-Earth Science and Technology (JAMSTEC))
14. Relaminarization and drag reduction effect by traveling wave-like control in turbulent channel flow
    Hiroya MAMORI(Tokyo University of Agriculture and Technology)
15. Influence of the Stiffness of Brake Pad on Disk Brake Squeal
    OURA Yasunori(University of Shiga Prefecture)
16. Micro-Nano Manipulation and Measurement System for Single Cell Analysis
    MARUYAMA HISATAKA(Nagoya University)
17. A Study of practical mechanisms and control snake-like robots
    Hiroya Yamada(HiBot Corporation)
18. Methodology for Supporting the Design of Sustainable Society Scenarios
    KISHITA Yusuke(National Institute of Indnstrial Science and Technology (AIST))
19. Study on energy saving of production facilities by reducing energy consumption of machine tools
    Akio　HAYASHI(Kanagawa UNIV.)
20. Development of high-speed, high-precision 5-axis control abrasive type water cutting equipment
    AOKI Takuya（Sugino Machine Limited）
21. The design work of Partial-Height Platform Screen door System for Urban Railway
    AKIYAMA Kimiya（Kyosan Electric Manufacturing, Co., Ltd.）
22. Development of Noise Reduction Technology for Flexible Media Handling Machines
    ISHIKAWA Misato（TOSHIBA Corporation）
23. Construction Robotics of Lunar Sandbag Array
    INOUE Daisuke(Tokyu Construction, Co., Ltd.)
24. Vibration analysis for tapered roller bearing fatigue prevention
    EZAKI Yuya(Mitsubishi Electric Corporation)
25. Development of topology optimization method for incompressible viscous flow
    KUBO Seiji(IHI Corporation)
26. Development of High Efficient Cutting technology with High-Pressure Coolant for Difficult-to-Machine Material
    SUGINO Atsushi(Daido Steel Co., Ltd.)
27. Development of multi body dynamics analysis technique coupled with hydrodynamic analysis of oil-film and application to swash plate type piston pumps and motors
    SUZUKI Kenta(Hitachi, Ltd., Hitachi Research Laboratory)
28. Development of leak-evaluation method for casing of process compressor
    TANNO Yohei(Hitachi, Ltd.)
29. Simultaneous Vibration Control in Two Directions Using an Impact Damper
    NAGASHIMA Takaaki(Mitsubishi Electric Corporation)
30. Development of newly designed tube for supercritical sliding pressure boiler
    NAKAHARAI Hiroyuki(MITSUBISHI HEAVY INDUSTRIES, LTD.)
31. Development of ultra-precision machine tools for optical mold machining with a high-speed and ultra-precision positioning performance
    HIROSE Tomohiro(NACHI-FUJIKOSHI CORP.)
32. Improvement of Thermal-Hydraulic Analysis for Prediction of Boiling Heat Transfer
    FUKUTA Masato(TOSHIBA Corporation)
33. Development of the Motor Driven Compressor for Environmental Control System of More Electric Aircraft
    MITSUOKA Daisuke (Shimadzu Corporation)
34. Evaluation Method for Beam-mode Buckling of Buried Pipeline Subjected to Seismic Ground Motion
    MITSUYA Masaki(Tokyo Gas Co., Ltd.)
35. Development of an evaluation method of acoustic vehicle alerting system
    YAEGASHI Naoki(Mitsubishi Electric Corporation)
36. Development of direct methanol fuel cell system for portable use
    YAGI Ryosuke(TOSHIBA Corporation)
37. Improvement of FEM analysis method with phase transformation and tempering effect
    YAMAZAKI Yosuke(Nippon Steel & Sumitomo Metal Corp.)
38. Improvement of Thermal Fatigue Life Evaluation Method for Cu Wirings of Print Circuit Board
    YAMAYOSE Yu(TOSHIBA Corporation)

1. Characteristic operation of development program “science and handicraft workshops for parents and children” by the Japan Society of Mechanical Engineering Kansai Branch Senior Club
   The Japan Society of Mechanical Engineers Kansai Branch Senior Club “science and handicraft workshops for parents and children”
2. Development of “Tsukuba Challenge” as a training ground for system integration engineers
   Shin’ichi YUTA(Shibaura Institute of Technology)

1. Bellows Packless Valve, type NBV
   SAGINOMIYA SEISAKUSHO, INC.
2. Compact, portable, simple-type multi-layer welding robot ISHIMATSU
   CHORYO ENGINEERING CO.,LTD

1. Kyosuke Ono(Formerly, Tokyo Institute of Technology )
   Contribution to advance of mechanical technology and science in information equipment
2.  KATO Yoshiaki（JATCO Ltd.）
   Commercialized improvement technology of transmission performance of steel belt CVT for automobiles with cooperation between industry and university
3. SUMITANI Keiji (Toyota Motor Corporation)
   Technological development of vehicle aerodynamics and cross-wind stability
4. Tsutomu Hasegawa(Kumamoto National College of Technology)
   Model-based robotic intelligence and its application to robotic support of daily human life

1. Development of Microporous Covered Stent for Cerebral Aneurysm Treatment (Hydrodynamical Evaluation of Stent Embolization and Optimization of Pore Design of Microporous Film)
   TAJIKAWA Tsutomu (Kansai University)
   NAKAGAWA Yuta(Formerly, Kansai University)
   KUREBAYASHI Yoshio(Formerly, Kansai University)
   NISHI Shogo(Sapporp Higashi Tokushukai Hospital)
   NAKAYAMA Yasuhide(National Cerebral and Cardiovascular Center)
2. Manipulation of a Pneumatic Hyper-Redundant Actuator
   DATE Hisashi(National Defense Academy)
   TAKITA Yoshihiro(National Defense Academy)
3. Numerical Study on the Morphology and Mechanical Role of Healthy and Osteoporotic Vertebral Trabecular Bone
   YOSHIWARA Yuto(Keio University)
   Miguel CLANCHE(Ecole Centrale de Nantes, France)
   Khairul Salleh BASARUDDIN(Keio University)
   TAKANO Naoki(Keio University)
   NAKANO Takayoshi(Osaka University)
4. Failure Mechanism of Combustion Chamber of Liquid Rocket Engine under Severe Multi-Physics Conditions (Residual Deformation of Chamber Throat)
   NISHIMOTO Miki(Japan Aerospace Exploration Agency)
   YAMANISHI Nobuhiro(Japan Aerospace Exploration Agency)
   YOSHIMURA Shinobu(The University of Tokyo)
   KASAHARA Naoto(The University of Tokyo)
   AKIBA Hiroshi(Allied Engineering Corporation)
5. Atomic-level Modelling for Predicting Interface Strength in Resin Molded Structure
   YAMAZAKI Miki(Hitachi, Ltd.)
   IWASAKI Tomio(Hitachi, Ltd.)
   IZUMI Satoshi(The University of Tokyo)
   SAKAI Shinsuke(The University of Tokyo)
6. Re-examination of the emissivity of diesel flames
   KAMIMOTO Takeyuki(Tokyo Institute of Technology)
   MURAYAMA Yoshiyasu(Nigata Power Systems Co., Ltd.)
7. Simulation for Thermal Radiation Emitted from Functional Surface
   HIRASHIMA Daisuke(Tokyo Institute of Technology)
   HANAMURA Katsunori(Tokyo Institute of Technology)
8. Heat and Fluid Flow in Accident of Fukushima Daiichi Nuclear Power Plant, Unit 2(Accident Scenario based on Thermodynamic Model)
   MARUYAMA Shigenao(Tohoku University)
9. Yield Prediction Method of a Reaction in a Micro-Fluid Device and Experimental Proof of Increased Production Using Parallel-Connected Devices
   TOGASHI Shigenori(Hitachi, Ltd.)
   ASANO Yukako(Hitachi, Ltd.)
   ENDO Yoshishige(Hitachi, Ltd.)
10. High-Speed Target Tracking Using Vibration-Based Image Features
    OHARA Ikuya(KYOCERA Document Solutions Inc.)
    TAKAKI Takeshi(Hiroshima University)
    ISHII Idaku(Hiroshima University)
11. A Path Following Control of Outdoor Blimp Robots for Disaster Surveillance
    SAIKI Hitomu(National Research Institute of Fire and Disaster)
    FUKAO Takanori(Kobe University)
    URAKUBO Takateru(Kobe University)
    KOHNO Takashi(Japan Aerospace Exploration Agency)
12. A Real-Time Hybrid Experimental Technique for Air Fluid Oscillation Phenomenon and Its Application
    NISHI Masayuki(NASU DENKI-TEKKO Co., Ltd.)
    KANDA Makoto(Nihon University)
    WATANABE Toru(Nihon University)
    WATANABE Masahiro(Aoyama Gakuin University)
    TANAKA Hidekazu(Formerly, Nihon University)
13. Development of a Passive Type MR Damper with Variable Damping Characteristics Dependent on the Displacement and Velocity
    MURAKAMI Takahiro(Central Research Institute of Electric Power Industry)
    SAKAI Michiya(Central Research Institute of Electric Power Industry)
    NAKANO Masami(Tohoku University)
14. Accuracy Improvement of Tool Path of Five-Axis Machining Centers Based on Measurement and Compensation of Geometric Deviations
    TONE Shintaro(Nippon Steel & Sumitomo Metal Co.)
    KATO Noriyuki(Tokyo University of Agriculture and Technology)
    TSUTSUMI Masaomi(Tokyo University of Agriculture and Technology)
15. Simulation of Rolling Contact Fatigue Strength for Traction Drive Elements
    NARITA Yukihito(Muroran Institute of Technology)
    YAMANAKA Masashi(High Energy Accelerator Research Organization)
    KAZAMA Toshiharu(Muroran Institute of Technology)
    OSAFUNE Yasuhiro(Muroran Institute of Technology)
    MASUYAMA Tomoya(Tsuruoka National College of Technology)
16. Estimation and Improvement Method of Mesh Efficiency of Cylindrical Gears
    MORIKAWA Kunihiko(Nissan Motor Co., Ltd.)
    NISHIHARA Ryuta(Nissan Motor Co., Ltd.)
    MATSUMOTO Susumu(Waseda University)

1. Development of new automatic transmission “SKYACTIV-drive” with dynamic and environmental performance
   Mazda Motor Corporation
2. Development of Automatic Deboning Robot for Pork Thigh
   Mayekawa MFG. Co., Ltd.
3. Non-contacting actuator for stabilization of strip vibration and shape with dual coil electromagnets
   JFE Steel Corporation
4. High Efficiency Air Blown IGCC (Integrated Coal Gasification Combined Cycle) System
   Mitsubishi Hitachi Power Systems,Ltd.
   Joban Joint Power Co.,Ltd.
   The University of Tokyo
5. Development of the finishing process technology for the minute module-small gear by the fiber-reinforced plastic gear-shaped tool for high precision, high efficiency, and low environmental impact
   ORIENTAL MOTOR Co., Ltd.
6. Development of Simultaneous Reduction of NOx and PM After-Treatment System (Maintenance Free & without Urea) for Light-Duty and Heavy-Duty Commercial Vehicles
   Hino Moters, Ltd.
7. Development of an Intelligent System for Compensating and Maintaining Geometric Accuracy of Five-axis Controlled Machines
   OKUMA Corporation

1. Development of A Multi-scale Simulator of Blood Flow from Cellular to Continuum Level
   OMORI Toshihiro(Tohoku University)
2. A Study of Mechanical Regulatory Mechanism of Actin Cytoskeletal Structure Dynamics in Migrating Cells
   OKEYO Kennedy Omondi(The University of Tokyo)
3. Research on Quantification of the Quality Depending on Human Feeling and its Application to Products Design
   CHIHARA Takanori(Tokyo Metropolitan University)
4. Regulatory Mechanism of Tendon Functions in Tissue Remodelling in Response to Mechanical Loadings
   MAEDA Eijiro(Hokkaido University)
5. A Study on the Suppression of Hydrogen Embrittlement by Surface Modification
   TAKAKUWA Osamu(Tohoku University)
6. Mechanical and Physical Characterization of Polymer-matrix Nanocomposite Systems for Design of High-performance Cryogenic Devices
   TAKEDA Tomo(Tohoku University)
7. Research on Meshfree Methods for Solids and Structures
   TANAKA Satoyuki(Hiroshima University)
8. Development of Fabrication Process of Functionally Graded Foam Material and Evaluation of its Mechanical Properties
   HIGUCHI Masahiro(Kanazawa University)
9. Quantification and Modeling for Wall Chemical Quenching Effect on Micro-scale Combustion
   SAIKI Yu(Nagoya Institute of Technology)
10. Research on Combustion Phenomena and Gas Reforming Process in Woody Biomass Gasification
    NAKATSUKA Noriaki(Osaka University)
11. Investigations into Multi-scale Thermo-fluid Dynamics: Transitions of Newtonian Fluid Through Pipe Flows and Electro-chemical Reactions in SOFCs Through Ionic and Electronic Current
    NISHI Mina(National Institute of Advanced Industrial Science and Technology)
12. Unique Reaction Mechanisms in coal combustion for near Zero C02 Emissions
    WATANABE Hirotatsu(Tokyo Institute of Technology)
13. Study on Microscale Fluid Flows by nanoscale Flow Measure methods Using Evanescent wave
    KAZOE Yutaka(The University of Tokyo)
14. Study of Micro/Nano Fluid Dynamic Phenomena Based on the Molecular Statistical Characteristics
    HANASAKI Itsuo(Osaka University)
15. Improvement of measurement Accuracy of Pressure and Temperature Sensitive Paint
    MATSUDA Yu(Nagoya University)
16. Haptic Signal Processing for Human Support Robot
    TSUJI Toshiaki(Saitama University)
17. Wide-Area and Accurate 3D Measurement based on Analysis of Spatio-Temporal Image
    TERABAYASHI Kenji(Shizuoka University)
18. Research on High-speed Manipulations of Flexible Objects by a High-speed Robot System
    YAMAKAWA Yuji(The University of Tokyo)
19. Vibration Suppression of Flexible Structures Using Piezoelectric Elements
    YAMADA Keisuke(Kansai University)
20. Study on Diagnosis and Evaluation of Tribological Phenomena Using Acoustic Emission Technique
    HASE Alan(Saitama Institute of Technology)
21. Improvement of cooling performance of gas turbine blade
    AGATA Yukiko(Tohoku Electric Power Co., Inc.)
22. Development of contact force measurement method on sliding area of high-pressure fuel pump
    ARITOMI Shunsuke(Hitachi, Ltd.)
23. Development of a head-care robot using bio-signal evaluation
    ANDO Takeshi(Panasonic Corporation)
24. Development of techniques for experiment and measurement of gas-liquid two-phase flow
    ISHIKAWA Atsushi(IHI Corporation)
25. Development of the LED lighting equipment with dimming and color control function for ABENO HARUKAS building
    ISHITOBI Kenichi(Sharp Corporation)
26. Handling robot for moving object using motion state estimation and prediction
    EMOTO Shuhei(IHI Corporation)
27. Development of easy and effective coupling method between mechanical and structural analyses for electrographic devices
    OIKAWA Ken(Ricoh Company, Ltd.)
28. Development of combustion control for gasoline HCCI engine system
    OGATA Kenishiro(Hitachi, Ltd.)
29. Development of structural-design technology for construction machinery
    KITA Yasuki(Hitachi, Ltd.)
30. Development of detection algorithm for BWR oscillation power range monitor using period standard deviation
    SAKAI Norio(Toshiba Corporation)
31. Development of lead free Cu alloy for sliding members bearing metal
    SATO Tomohiro(Kurimoto, Ltd.)
32. Development of numerical analysis method of flow-acoustic resonance in main steam line, and resonance suppression method
    TAMURA Akinori(Hitachi, Ltd.)
33. Development of sheet feeding technique using friction reduction phenomenon of piled sheets by ultrasonic vibration
    TOYA Kiminori(Toshiba Corporation)
34. Evaluation of Ash Deposition of Solid Fuel with Low Melting Point in Coal-fired Boiler
    PAK Haeyang(Kobe Steel, Ltd.)
35. Development of microscopic simulation and life prediction of high Cr steel subject to Type IV creep damage
    FUKAHORI Takuya(Mitsubishi Heavy Industries Ltd.)
36. Development of technology to improve thermal fatigue life analysis solder joints in electronic devices
    MONDA Tomoko(Toshiba Corporation)
37. Development of high-performance technology for hard disk drives according to the adaptive feed forward control
    YABUI Shota(HGST Japan, Ltd.)
38. Development of structure of optical pickup for reducing angular error of optical component
    YAMASAKI Tatsuya(Hitachi, Ltd.)
39. Development of the prediction method of interior noise in rolling stock
    YOSHIZAWA Takashi(Hitachi, Ltd.)

1. Social Contribution by the Robot Education Activities through the Academic Society
   KOTOSAKA Shinya(Saitama University)
   SATO Tomomasa(The University of Tokyo)
2. Continued Excellence in the Fields of Educational Support through Exhibits and Events and Public Outreach in Science and Technology
   TOSHIBA SCIENCE MUSEUM
3. The Enlightenment of the Space and the Education Project of Next Generation Space Engineer by “The Satellite Design Contest”; Intended for Students from High School to Post-graduate
   The Satellite Design Contest Executive Committee

1. The micro channel heat exchanger with high pressure resistance and high efficiency
   WELCON Inc.
2. Power Assist Globe
   DAIYA INDUSTRY Co., Ltd..
3. Double-row angular contact roller rings, Model RW
   THK Co.,Ltd.

1. Toshio SAKON (Mitsubishi Heavy Industries, Ltd.)
   Research and Development on the Mechanical Design Procedures and Life Prediction
2. Shigeo HIROSE (Tokyo Institute of Technology）
   Multiple Design and Application of Creative Robots and Contribution to
3. Masahiko MIYAKI (DENSO CORPORATION)
   Development of Diesel Common Rail System and Contribution to Clean Diesel Vehicle Popularization

1. Biomechanical Contribution of Cytoskeletal Structures to Traction Forces in Cultured Smooth Muscle Cells
   OHASHI Toshiro(Tohoku University)
   KAMEDA Norifumi(Tohoku University)
   NAKAMURA Shouji(Tohoku University)
   SATO Masaaki(Tohoku University)
2. Development of Master-Slave Surgical Robot System with Heartbeat Synchronization Mechanism (Evaluation of Position Synchronization Performance and Synchronization Suture Operability)
   TOYODA Kazutaka(Waseda University)
   OKAMOTO Jun(Tokyo Women’s Medical University)
   KAWAMURA Kazuya(Waseda University)
   KOBAYASHI Yo(Waseda University)
   TAKEMURA Hirofumi(Gifu University)
   FUJIE Masakatsu(Waseda University)
3. Development of the Residual Stress Improvement Method for Small-Diameter Butt-Welding Pipe (Improvement of Residual Stress through Application of Delta-T Process)
   AOIKE Satoru(Hitachi, Ltd.)
   TSURUKI Masaki(Hitachi, Ltd.)
   FUKUDA Yuka(Hitachi-GE Nuclear Energy, Ltd.)
   ORITANI Naohiko(Hitachi-GE Nuclear Energy, Ltd.)
4. Microscopic Observation of the Mechanism for Brittle Striation Formation in Low Carbon Steel Fatigued in Hydrogen Gas : TEM and EBSD Observations Corresponding to Fractography
   NISHIKAWA Hide-aki (Hitachi, Ltd.)
   ODA Yasuji (Kyushu University)
   TAKAHASHI Yoshimasa (Kansai University)
   NOGUCHI Hiroshi(Kyushu University)
5. Development of High-Temperature Ultrasonic Fatigue Testing System
   FURUYA Yoshiyuki (National Institute for Materials Science)
   KOBAYASHI Kazuo(National Institute for Materials Science)
   HAYAKAWA Masao(National Institute for Materials Science)
   SAKAMOTO Masao(National Institute for Materials Science)
   KOIZUMI Yutaka(National Institute for Materials Science)
   HARADA Hiroshi(National Institute for Materials Science)
6. Simultaneous Measurement of Oxygen Diffusivity and Visualization of Moisture Distribution in Gas Diffusion Layer with Wettability Distribution for Improvement of Polymer Electrolyte Fuel Cell Performance
   Ryo KORESAWA(Yokohama National University)
   Tadafumi DAITOKU (Akita Prefectural University)
   Yoshio UTAKA(Yokohama National University)
   Kentaro UESUGI(Japan Sychrotoron Radiation Research Institute)
7. Measurement of Droplet Size, Velocity and Spatial Distribution of Mass Flux in Spray by Combining Focus and Defocus Imaging Technique
   Yuki SHIGETA（Keio University)
   Kentaro HAYASHI（Keio University)
   Mitsuhisa ICHIYANAGI（Sophia University)
   Koichi HISHIDA （Keio University)
8. Numerical Analysis of Free-Surface Flows under Various Conditions in Acceleration (Improvement of CIP-LSM : CIP-Based Level Set & MARS)
   HIMENO Takehiro(The University of Tokyo)
   NEGISHI Hideyo(Japan Aerospace Exploration Agency)
   NONAKA Satoshi(Japan Aerospace Exploration Agency)
   INOUE Chihiro(The University of Tokyo)
   WATANABE Toshinori(The University of Tokyo)
   UZAWA Seiji(The University of Tokyo)
9. Evaluation of Turbulence Kinetic Energy Budget in Turbulent Flows by Using a Photobleaching Molecular Tagging Velocimetry
   Hiroki MIZUMOTO(Kobe University)
   Shigeo HOSOKAWA (Kobe University)
   Akio TOMIYAMA(Kobe University)
10. Three Dimensional Shape Measurement Using a Multi-Sided Mirror(Mechanical Systems)
    ISHII Idaku(Hiroshima University)
    FUJII Hiroaki(DENSO Corporation)
    YAMAMOTO Kenkichi(Canon Inc.)
    TAKAKI Takeshi(Hiroshima University)
11. A Dual-Axis Liquid Micro Rate Gyroscope Using an Electro-Conjugate Fluid
    Yoshitsugu OGAWA（Tokyo Institute of Technology）
    Shinichi YOKOTA（Tokyo Institute of Technology）
    Kazuya EDAMURA (New Technology Management Co.,Ltd.)
    Kenjiro TAKEMURA（Keio University)
12. Scanning Probe for Coordinate Measurement Using a Translational Parallel Mechanism (Prototyping of the Isotropic Mechanism and Calibration of the Mechanical Parameters)
    HARADA Takashi(Kinki University)
    Ke Dong(Kinki University)
    Kenta KANAMORI(Kinki University)
13. Multiple Magnetic Suspension Systems : 1st Report, Basic Concepts and Theorems(Mechanical Systems)
    MIZUNO Takeshi(Saitama University)
    TAKASAKI Masaya(Saitama University)
    ISHINO Yuji(Saitama University)
14. Multi-Speed Ratio Variable System to Transmit Power and Motion Continuously
    Jungchul KANG(Kyoto University)
    Masaharu KOMORI(Kyoto University)
    Fumi TAKEOKA(Kyoto University)
    Yuji ONODERA(Kyoto University)
15. Prediction of Chatter Stability of Machine Tool with Consideration of Friction Damping in Guide (Development of Basic Model and Investigation on Effects of Friction and Stiffness)
    SHINAGAWA Miki(IHI Corporation)
    Eiji SHAMOTO(NAGOYA University)
16. Electric Contact Characteristics at the Nanoscale Probe Tip
    Yasushi TOMIZAWA(TOSHIBA CORPORATION)
    Yasuhisa ANDO(Tokyo University of Agriculture and Technology)
    Hiroyuki FUJITA(The University of Tokyo)

1. Washing Technology Using Vacuum Boiling
   Miura Co., Ltd
2. Quince for Surveillance in the Reactor Buildings
   Chiba Institute of Technology
3. Development of Dual-arm Robot MOTOMAN-SDA20D
   YASKAWA ELECTRIC CORPRATION
4. Innovative Air-Cooled Package Air Conditioner for Data Centers Reduces Energy Use by 50%
   NTT FACILTIES,INC. Hitachi Appliances,Inc. Waseda University
5. Fully Automated Steel Plate Bending System for Shipbuilding
   JMU AMTEC Co.,Ltd
   IEM Co., Ltd
   Japan Marine United Corporation
   IHI scube co,ltd.
6. Development of a New Generation Clean Diesel Engine (2.2L) which Achieves both Driving Pleasure and Environmental Performance-Realization of a concept for ultra-low compression ratio of 14.0
   Mazda Motor Corporation
7. Development of High Efficiency Variable Cylinder Rotary Compressor
   TOSHIBA CARRIER CORPORATION
8. Development of Diesel Engine using New Fuel Injection System-Direct Monitoring of Fuel Injection Pressure using Injector with Built-in Sensor, and its Applications –
   TOYOTA MOTOR CORPORATION
   DENSO CORPORATION

1. Study on Mobile Audition for Map-Generation and Identification of Multiple Sound Sources From Robot in Motion
   Yoko SASAKI(The National Institute of Advanced Industrial Science and Technology)
2. Hemodynamic Index for the Initiation of Cerebral Aneurysms: A New Proposal with Evaluation Based on Computational Fluid DynamicsYuji SHIMOGONYA(University of HYOGO)
3. Development of multi-scale measurement methods from blood vessels to organelle levels and its applications
   Shukei SUGITA(Nagoya Institute of Technology)
4. Intention Estimation from Human Behavior and Development of Human Support System
   Yusuke TAMURA(Chuo University)
5. Spatial Memory as Human Interface for Intelligent Space
   Mihoko NIITUMA(Chuo University)
6. Study of fatigue damage evaluation using Synchrotron radiation mCT imaging
   Daiki SHIOZAWA(Kobe University)
7. Study on Multi-physics Properties of Nano-structured Ferroelectrics from Atomic and Electronic Simulations
   Takahiro SHIMADA(Kyoto University)
8. Study on Automatic Computation of Consistent Tangent Moduli Using Complex-step Derivative and Its Application to Finite Deformation Problems
   Masato TANAKA(TOYOTA CENTRAL R&D LABS., INC.)
9. Study on Mesoscopical Inhomogeneous Material Modeling for Free Surface Roughening Behavior of Polycrystalline Metal Sheets
   Tsuyoshi FURUSHIMA(Tokyo Metropolitan University)
10. Study on Critical Heat Flux Mechanism in Pool Boiling
    Ayako ONO(Japan Atomic Energy Agency)
11. A Study of Ignition and Combustion of Lean and Diluted Mixture in a Highly Efficient Internal Combustion Engine
    Tatsuya KUBOYAMA(Chiba University)
12. Study on a High-efficiency Thermoacoustic Engine without Moving Parts, which Enables Low-temperature Differential and Waste-heat Recovery
    Shinya HASEGAWA(Tokai University)
13. A Study of Soot Formation Process in Multi-Phase Combustion
    Jun HAYASHI(Osaka University)
14. Experimental study on the turbulent flow phenomena with a new technique for the simultaneous measurement of velocity and pressure
    Osamu TERASHIMA(Nagoya University)
15. Theoretical and experimental study on the micro-pressure wave
    Tokuzo MIYACHI(Railway Technical Research Institute)
16. Research on Motion and Vibration Control for Landing and Moving of Spacecraft in Lunar and Planetary Exploration
    Masatsugu OTSUKI(Japan Aerospace Exploration Agency)
17. GNSS-based Localization and Mapping for Mobile Robots
    Taro SUZUKI(Tokyo University of Marine Science and Technology)
18. Development of a Translational Parallel Manipulator with Large Workspace and High Precision of Platform Orientation
    Masataka TANABE(Kawasaki Heavy Industries, Ltd.)
19. High Speed High Sensitivity Slip Sensor and Its Application
    Seiichi TESHIGAWARA(NSK Ltd.)
20. Study on Cutting Characteristics of Indexable Insert Drill with Non-axisymmetric Geometry and Its Applicability to Difficult-to-cut Materials
    Masato OKADA(Kanazawa University)
21. Experimental Evaluation of Pressure Leadings of Detonation Waves in High Pressure Mixture
    Masahiro UCHIDA (IHI Corporation)
22. Improvement of Damping Material for Carriage Arm in Hard Disk Drive
    Hajime EGUCHI(Hitachi, Ltd.)
23. Development of Visualization Techniques of Vaneless Rotating Stall in Centrifugal Compressors Using PIVSatoshi OHUCHIDA(IHI Corporation)
24. Internal Stress Evaluation of Ceramic Element under The Absorbed High Energy
    Makoto ONISHI(TOSHIBA CORPORATION)
25. Development of Crack Growth Analysis and Fracture Assessment Techniques for Structural Materials and Structures of Light Water Reactors
    Takuya OGAWA(TOSHIBA CORPORATION)
26. Development of the Compact High Performance Blower for Automobile HVAC
    Masatoshi KAWASAKI(SANDEN Corporation.)
27. Development of Evaluation Technology for Crashworthy Structure of Railway’s Rolling Stock
    Sota KIMURA(Hitachi, Ltd.)
28. Development of Method for Fault Detection of Railway Vehicle Vertical Dampers by Using Phase Difference between Translational and Rotational Motion
    Takashi KOJIMA(Railway Technical Research Institute)
29. Development of Prefabrication Method Using Scaffolding for Mechanical Installation Work Shortenings in Big Plant Construction
    Koji SATO(Hitachi Plant Technologies, Ltd.)
30. Development and Evaluation of Storage Battery Hybrid Train System
    Kenichi SHIBANUMA(East Japan Railway Company)
31. Development of Flow-Thermal Analyses Technique for Heavy Electrical Appliance Design Based on Turbulence Induced Multi-Physics Phenomena
    Tomohiko JIMBO(TOSHIBA CORPORATION)
32. Development of Meso-scale Molecular Fluid Simulation Technique for Design of Micro/nano Devices
    Taisuke SUGI(Hitachi, Ltd.)
33. Development of Diesel Hybrid Vehicle Braking Systems
    Atsushi TANIMOTO(WEST JAPAN RAILWAY COMPANY)
34. Development of Deformable Mirror Actuator for Spherical Aberration Compensation
    Jiro HASHIZUME(Hitachi, Ltd.)
35. Development of Centrifugal Blower Stage with Higher Efficiency and Wider Operating Range
    Kiyotaka HIRADATE (Hitachi, Ltd.)
36. Development of Integrated System of Biomass Gasification and Liquid Fuel Synthesis
    Keigo MATSUMOTO (Mitsubishi Heavy Industries, Ltd.)
37. Development of Technique for Manufacturing Glassless 3D-LCDs
    Kentaro MIYAZAKI(TOSHIBA CORPORATION)
38. Development of Preview Control for Electric Active Suspension
    Kenshiro YOSHIOKA(Toyota Technical Development Corp.)
39. Development of Creep Damage Evaluation Method under Multi-Axial Stress Conditions
    Kimiaki YOSHIDA(IHI Corporation)
40. Replication of Three-dimensional Microstructures by Using Microstereolithorography and Soft-molding Process
    Naoki YOSHIMURA(TOSHIBA CORPORATION)

1. Engineering Design Educational in Future Dream! Robotics Mechatronics Design Competition
   Executive Committee of Future Dream! Robotics Mechatronics Design Competition
2. Foundation and Promotion of Science and Engineering Educational Program Based on Execution of Project about Space EngineeringHitoshi Doki, Hiroaki AKIYAMA, Yutaka WADA
3. Cooperative Education for Applied Design and Manufacturing for Undergraduate Students through “Kawakudari(down-the-river) Intership” Program
   Teachers in charge of Cooperative Practicum for Applied Design and Manufacturing at Kyoto Institute of Technology
4. Distinguished Text Book of “Robotics” and Improvement of Educational Methods
   Publication Committee of Text Book “Robotics”

1. A Nighttime Power Thermal-Storage Steam Generator: JOKIGEN
   IHI Inspection & Instrumentation Co., Ltd.
2. Center-Less Gear Lapping Machine “KSL25” (An Innovative Gear Finishing Machine allows Highly Accurate and Efficient Lapping of both Tooth Flanks Simultaneously.)
   KASHIFUJI WORKS,LTD.
3. Anti-seismic Underground Bicycle Park – ECO Cycle
   Giken Seisakusho Co., Ltd
4. EXPLINER -Inspection Robot for High-Voltage Transmission Lines-
   HiBot Corp.
5. CPWS (Cell Processing Work Station) System
   Panasonic Healthcare Co., Ltd.

1. Fumio INADA
   (Central Research Institute of Electric Power Industry)
   Technology Development and Research Information Exchange to Enhance Pipe-wall-thinning Management
2. Tsuyoshi YASUKI(Toyota Motor Corporation)
   Passive Safety Research in Crashworthiness and Occupant Protection

1. A 3-Dimentional Accurate Simulation Method of Mass Evacuation Using Precise Human Joint Model ( Application to a Mass Evacuation Drill by High-School Students)
   Jiro URII(CAS Research),
   Takao KAKIZAKI(Nihon University),
   Shusaku INOUE(Takenaka Corporation),
   Tatsuo OHMACHI(Japan Dam Engineering Center)
2. Pressure Distribution Measurement on a Rotating Disk Surface by Pressure-Sensitive PaintTomohiro KAMEYA(Nagoya University),
   Yu MATSUDA(Nagoya University),
   Hiroki YAMAGUCHI(Nagoya University),
   Yasuhiro EGAMI(Aichi Institute of Technology),
   Tomohide NIIMI(Nagoya University)
3. Instability Mode Analysis of Dislocation Nucleation from Notch Based on Atomistic Model ( Instability Activation Mechanism under Finite Temperature )
   Yoshitaka UMENO(The University of Tokyo),
   Takahiro SHIMADA(Kyoto University),
   Takayuki KITAMURA(Kyoto University)
4. Fatigue Crack Growth Simulation Using S-Version FEM( 3rd Report , Fatigue of 3D.Sureface Crack )
   Masanori KIKUCHI(Tokyo University of Science),
   Yoshitaka WADA(Kinki University)
   Atsushi UTSUNOMIYA(Topcon Corporation)
   Hitomi SUYAMA(Honda R&D Co.,Ltd)
5. Development of in-situ TEM Observation Method on Plasticity in Nanoscale Component
   Takashi SUMIAGAWA(Kyoto University),
   Yujiro KITAGAWA(Kyoto University),
   Takayuki KITAMURA(Kyoto University)
6. Lifetime Based Temperature and Velocity Measurement Using High-Speed Camera and Temperature Sensitive Particles
   Satoshi SOMEYA(The National Institute of Advanced Industrial Science and Technology),
   Mitsunori UCHIDA(Bridgestone Corporation),
   Keiko ISHII(Tokyo University of Science),
   Kaoru TOMINAGA(JFE Steel Co.),
   Li Yanrong(The University of Tokyo),
   Koji OKAMOTO(The University of Tokyo)
7. Experimental Study on Interfacial Thermal Resistance between Carbon Nanotube and Solid Material
   Jun HIROTANI(Kyushu University),
   Satoshi KAI(Japan Aviation Electronics Industry,Ltd.),
   Tatsuya IKUTA(Kyushu University),
   Koji TAKAHASHI(Kyushu University)
8. A New Spectrophotometer System for Measuring Thermal Radiation Characteristics of Real Surfaces of Thermal Engineering Entirely
   Toshiro MAKINO(Kyoto University),
   Hidenobu WAKABAYASHI(Kyoto University)
9. Unified Theory Based on Parameter Scaling for Derivation of Nonlinear Wave Equations in Bubbly Liquids
   Tetsuya KANAGAWA(The University of Tokyo),
   Takeru YANO(Osaka University),
   Masao WATANABE(Hokkaido University),
   Shigeo FUJIKAWA(Hokkaido University)
10. Fluid-Acoustic Interactions in Acoustic Radiation in Turbulent Cavity Flows : Fluid-Dynamic Oscillations
    Hiroshi YOKOYAMA(Toyohashi University of Technology)
    Chisachi KATO(The University of Tokyo)
11. Antisway Control Considering Phase of Vibration of Suspended Load of A Crane
    Masahiro KURIMOTO(Okumura Corporation)
    Hiroshi YABINO(Keio University)
12. Analytical Study on the Safety of High Speed Railway Vehicle on Excited Tracks
    Kazuhiko NISHIMURA(Central Japan Railway Company)
    Yoshiaki TERUMICHI(Sophia University),
    Tsutomu MORIMURA(Central Japan Railway Company),
    Kiyoshi SOGABE(Sophia University)
13. Generalization of Component Mode Synthesis Using Modal Differential Sub-Structure Method and Guyan Reduction
    Takafumi MOCHIZUKI(ESTECH Corp.),
    Ichiro HAGIWARA(Tokyo Institute of Technology)
14. A Path Following Feedback Control Method with a Variable Velocity for a Cooperative Transportation System with Two Car-Like Mobile Robots and Its Experimental Verification
    Hiroaki YAMAGUCHI(Aoyama Gakuin University)
    Tomoya HIRAMOTO(JMA Systems Corporation)
    Atsushi KAWAKAMI(Aoyama Gakuin University)
15. Development of CAM System for 5-Axis NURBS Interpolated Machining ( NC Data Generation by Generalized Post-Processor )
    Yasufumi UEDA(Canon Inc.)
    Tohru ISHIDA(The university of Tokushima)
    Yoshimi TAKEUCHI(Chubu University)
16. Development of Epoxy Resin Polishing Pads for Glass Polishing
    Junji MURATA(Ritsumeikan University)
    Yasuhiro TANI(Ritsumeikan University)
    Ryoichi HIROKAWA(Kokonoe Electric Co.,Ltd.)
    Nobuyuki NOMURA(Kokonoe Electric Co.,Ltd.)
    Zhang Yu(Ritsumeikan University)
    Junki UNO(Ritsumeikan University)

1. Development of Prosthetic Knee Joint with Combination of Stance Control by Hydraulic Damper and Swing Control by Microcomputer Control of Pneumatic Pressure
   Masahiko OKUDA(Nabtesco Corporation)
   Toyohiko IMAKITA(Nabtesco Corporation)
   Aritomo FUKUI(Nabtesco Corporation)
   Yoshiaki NAKAYA(NABTEC Co., Ltd)
2. Development of high-performance take-out robots for injection molding machines using a structural optimization method
   Takayo KOTANI (Yushin Precision Equipment Co., Ltd.)
   Hiroyuki ARAI (Yushin Precision Equipment Co., Ltd.)
3. Development of Device to Prevent Deviation of the Tokaido Shinkansen during an EarthquakeKei SAKANOUE (Central Japan Railway Company)
   Masahito ADACHI (Central Japan Railway Company)
   Yoshinori MINAMI (Central Japan Railway Company)
   Hironobu SUNAMI (Central Japan Railway Company)
   Nobuhisa TAKADA (Nippon Sharyo, LTD.)
4. Large Scale Centrifugal Compressor realizing Low Carbon Society
   Hideto NOGIWA (Hitachi Plant Technologies, Ltd.),
   Yoshihisa MAEDA (Hitachi Plant Technologies, Ltd.),
   Takanori SHIBATA (Hitachi, Ltd.),
   Takeshi TUKAMOTO (Hitachi, Ltd.),
   Yohei MAGARA (Hitachi, Ltd.)
5. Development of a New Parallel Hybrid System
   Koichi HAYASAKI (NISSAN MOTOR CO.,LTD.) ,
   Kazutaka ADACHI (NISSAN MOTOR CO.,LTD.) ,
   Keisuke CHUJO (NISSAN MOTOR CO.,LTD.) ,
   Yoshinori YAMAMURA (NISSAN MOTOR CO.,LTD.) ,
   Tatsuya Osone (JATCO Ltd)
6. Development of an ultra-high-compression-ratio gasoline engine (1.3L) Realization of 30km/L over the Japanese 10-15 mode
   Mitsuo HITOMI (Mazda Motor Corporation)
   Takashi YOUSO (Mazda Motor Corporation)
   Kiyotaka SATO (Mazda Motor Corporation)
   Kunitomo MINAMITANI (Mazda Motor Corporation)
   Yasushi NAKAHARA (Mazda Motor Corporation)
7. Low-Power 80W Energy-Saving Robot which can collaborate with human safety and comfortably
   Kousyun FUJIWARA (Toyota Motor Corporation)
   Hideyuki MURAYAMA (Toyota Motor Corporation)
   Naoyuki TAKESUE (Tokyo Metropolitan University)
   Haruo NAKANO (Ochiai Nexus)
   Kenji ISHII (Ochiai Nexus)
8. Development and Market Introduction of New-Generation Electric Vehicle with High-Performance Lithium-Ion Batteries
   Hiroaki YOSHIDA (Mitsubishi Motors Corporation)
   Kenichiro WADA (Mitsubishi Motors Corporation)
   Yuji TOZUKA (Mitsubishi Motors Corporation)
   Makoto KISHI (Mitsubishi Motors Corporation)

1. Subliminal Calibration for Machine Operation
   Hiroshi IGARASHI(Tokyo Denki University)
2. Functionality Evaluation of Smart Material for Medial and Welfare DeviceTakeshi Okuyama(Tohoku University)
3. Study on Biped Walking Vehicle
   Yusuke SUGAHARA(Kokushikan University)
4. Deformation Characteristics of Apatite Crystals and Three-dimensional Microstructure of Mineralized Tissue
   Kazuhiro FUJISAKI(Hokkaido University)
5. Evaluation of Time and Temperature-dependent Strengths and Failure Simulation of Fiber/Matrix Interface for Polymeric Composites
   Jun KOYANAGI(Japan Aerospace Exploration Agency)
6. Hierarchical Model Based on Atomistic Simulation and Dislocation Mechanics for Elementary Process of Lattice Defects
   Tomohito TSURU(Japan Atomic Energy Agency)
7. A Study on Evaluation of Deformation Behavior in Amorphous Metals by Local Lattice Instability Analysis
   Masaomi NISHIMURA(Shinshu University)
8. Diagnostic Analysis of the Fuel Cell by Eletrochemical Impedance Spectroscopy
   Hironori NAKAJIMA(Kyushu University)
9. A Study on Unsteady Combustion Mechanism for Homogeneous and Heterogeneous Mixtures
   Shinji NAKAYA(The University of Tokyo)
10. Study on Detailed Devolatilization Model for Numerical Simulation of Pulverized Coal Combustion
    Nozomi HASHIMOTO(Central Research Institute of Electric Power Industry)
11. Study on Mechanism of Mass Transfer across Air-Water Interface due to Drop Impingement
    Naohisa TAKAGAKI(Kyoto University)
12. The Study of 3D Visualization of Microparticle Concentration in Micro channel by Micro Process Tomography Method
    Choi Je-Eun(Chiba University)
13. Study on Instability and Transition of Plane Couette Flow Subjected to System Rotation
    Takahiro TSUKAHARA(Tokyo University of Science)
14. A Study of a Car Transportation System Using Multiple Mobile robots
    Mitsuru ENDO(Nihon University)
15. Research on Development of Reusable Robotic Task Skills
    Masayuki SHIMIZU(Shizuoka University)
16. Micro Displacement Visualization Mechanism Using Moiré Fringes and its Measurement System Based on an Image processing
    Takeshi TAKAKI(Hiroshima University)
17. Multi Time Scale Behavior Control Method for Autonomous Omni-Directional Mobile Robots
    Masaki TAKAHASHI(Keio University)
18. Application to Bio-technology and Green-technology Utilizing Micro Digital FabricationShinjiro UMEZU(Tokai University)
19. Investigation of Electric Rust Preventive Machining Method Friendly to Human and Environment with Ultra-Low Environmental Load and Resource Saving using Water as Machining Fluid
    Naohiro NISHIKAWA(Iwate University)
20. Development and Application of Walking Mode Maps
    Based on Tribology and Biomechanics
    Takeshi YAMAGUCHI(Tohoku University)
21. Development of a Visualization Method Based on Simplified Background Oriented Schlieren TechniqueJunichi AKATSUKA(Japan Aerospace Exploration Agency)
22. Development of Evacuation Techniques of Crack Initiation and Early Stage Propagation Based on Microscopic Measurement in Structural Material for Power Plants
    Yun Wang (Hitachi,Ltd.)
23. Development of Model Based Design Method of High Precision Control System for Mechanical Characteristic Variation
    Hironori OGAWA(Hitachi,Ltd.)
24. Development of Human-Robot Collaborative System Using Hand Guiding
    Yu OGURA(IHI Corporation)
25. Electromagnetic Noise Analysis and Noise Reduction Method of Machinery with a Motor
    Ryo KAWASAKI(Mitsubishi Electric Corporation)
26. Development of Exhaust Gas Clarification Equipment Using Activated Carbon
    Yosuke KIMURA(JFE Engineering Corporation)
27. Development of Batch SiC Epitaxial Growth System
    Takafumi SASAKI(Hitachi Kokusai Electric Inc.)
28. Development of the Estimation Technology for Axial Force Behavior of the Gasketed Joint at Elevated Temperature
    Koji SATO(Nippon Valqua Industries, Ltd.)
29. Development of Cooling Structures of Compact Lens Actuators for Optical Pickups Enabling High-speed Recording
    Wataru SATO(Hitachi,Ltd.)
30. Development of High Efficiency Brower for Steam Boiler
    Makoto SHIBA(MIURA Co.,Ltd.)
31. Development of Multi-resolution Technique and Pressure Smoothing Method in a Particle Method
    Masayuki TANAKA(Toshiba Co.,Ltd.)
32. Development of Large X-Ray Inspection Systems with Highly Precise Resolution
    Hiroyuki NAKATA(IHI Inspection & Instrumentation Co.,Ltd.)
33. Development of Multiaxial Fatigue Life Assessment Method Considering Non-proportional Loading
    Hiroshi NAKAMURA(IHI Corporation)
34. Development of NPPV Nasal Masks Custom-made for FE Personal Model
    Keiichi NINOMIYA(Niigata Polytechnic College)
35. Development of Sound Field Control Technology to Produce Listening Area and Sound Reduction Area by the Modification of Sound Attenuation
    Takahiro HIRUMA(Toshiba Corporation)
36. Vibration Control of Railway Vehicle with Parallel Cardan Drives by Traction Motor Torques
    Shingo MAKISHIMA(TOYODENKI SEIZO K.K.)
37. Development of the High Accuracy Evaluation Technique for Mechanical Properties under Impact Loading Using the Split-Hopkinson Bar Method
    Tomokazu MASUDA(Kobe Steel , Ltd.)
38. Optical Fiber Probe for Tiny-droplets and Bubbles Measurement
    Keisuke MATSUDA(Sumitomo Metal Industries, Ltd.)
39. Development of Quick Response Fuel Injector Technology
    for Direct-Injection Gasoline Engine
    Yoshihito YASUKAWA(Hitachi,Ltd.)
40. Development of Rigidity Measurement Method for High-speed and High-rigidity Spindle
    Taku YAMAZAKI(Yamazaki Mazak Corporation)

1. LOHAS Engineering and House of LOHAS
   Koji KATO (Nihon University)
   Atsushi HASHIMOTO (Nihon University)
   Kosuke ITO (Nihon University)
   Takayuki TAKEHI (Nihon University)
   Tomoyoshi Urabe (Nihon University)
2. Continuous Implementation of Experiential Learning of Manufacturing for Local Elementary, Middle and High School StudentsAtsuhide KITAGAWA (Kyoto Institute of Technology)
   Masashi YAMAKAWA (Kyoto Institute of Technology)
   Hiroyuki ONO (Kyoto Institute of Technology)
   Minoru OTA (Kyoto Institute of Technology)
3. Regional Collaborating Education Program for Advanced Manufacturing at Graduate School of Science and Engineering in Saitama University
   Global Nano Fabrication Course Management Board
   (Saitama University)
4. Educational practice aiming to connect basic subjects each other in mechanical engineering curriculum as well as lecture series of related mathematics
   Akihiko SHIMIZU (Kyushu University)

1. Zero-backlash Precision Reducer — The RollerDrive
   Sankyo Seisakusho Co.,Ltd.
2. “LineArt CHARMANT”-optical frame composed of nickel free super-elastic titanium alloy
   Charmant Inc
3. Low-profile 3-axis force sensors –Our innovation and product line
   Tec Gihan Co., Ltd
4. Switl (Scooping transfer equipment ) Equipment for handling soft or sol-gel condition materials without deforming their shape.
   Furukawa Kikou Co, Ltd
5. Automatic Changeover Thrufeed Centerless Grinder MSL-600 model and MFC-600 model
   MICRON MACHINERY CO., LTD

1. Masao SUZUKI (TOYOTA MOTOR CORPORATION)
   The Development of DI Diesel and Gaseous Fuel Engines Exceled in Good Fuel Economy and Low Emission Perormance

1. 1.Numerical Analysis Method of Contact Mechanics between a Sphere and a Flat with Sub-Nanometer Roughness Due to Lennard-Jones Surface Forces
   Kyosuke ONO
2. Study on Water Strider Robot Utilizing Surface Tension forces
   Kenji SUZUKI,
   Hiroyuki KOIKE,
   Hideaki TAKANOBU,
   Hirofumi MIURA
3. Development of Biomimetic Bearing with Hydrated Materials
   Yoshitaka NAKANISHI,
   Tatsuki TAKASHIMA,
   Hidehiko HIGAKI,
   Ken SHIMOTO,
   Takatoshi UMENO,
   Hiromasa MIURA,
   Yukihide IWAMOTO
4. Short Wave-Length Buckling Modes of Periodic Square Cell Structures Based on the Rotational Characteristics of Flexible Joints
   Hiro TANAKA,
   Yoji SHIBUTANI
5. Shape Prediction of Micro-Molten Solder and Its Application to Evaluating Fracture Life
   Hisashi TANIE
6. Development of Crystal Plasticity Phase-Field Model and Simulation of Microstructure Evolution with Plastic Deformation
   Akinori YAMANAKA,
   Tomohiro TAKAKI,
   Yoshihiro TOMITA
7. Inception Criteria for Entrainment of Molten Slag Droplet in an Entrained Flow Coal Gasifier
   Jun INUMARU,
   Hiroaki WATANABE,
   Maromu OHTAKA,
   Masami ASHIZAWA,
   Kazuyoshi ICHIKAWA
8. Micro Optical Viscosity Sensor for in situ Measurement Based on a Laser-Induced Capillary Wave
   Yoshihiro TAGUCHI,
   Ryusuke NAGAMACHI,
   Yuji NAGASAKA
9. Prediction of Cavitation Intensity and Erosion Area in Centrifugal Pump by Using Cavitating Flow Simulation With Bubble Flow Model
   Masashi FUKAYA,
   Yoshiaki TAMURA,
   Yoichiro MATSUMOTO
10. A Novel Method of Measuring Dynamic Surface Tension from the Profile of Capillary Jet (2nd Report, Measurement of Dynamic Surface Tension)
    Tatsuro WAKIMOTO,
    Kenji KATO,
    Toshiya TANI
11. Investigation of Excitation Methods in Active Control of Sound Transmission through a Thin Planar Structure
    Akira SANADA,
    Kouji HIGASHIYAMA,
    Nobuo TANAKA
12. Design and Fabrication of Compact Load Sensor Using AT-cut Quartz Crystal Resonators
    Keisuke NARUMI,
    Ayumi ASAKURA,
    Yu-Ching LIN,
    Toshio FUKUDA,
    Fumihito ARAI
13. Dynamic Display of Facial Expressions on the Face Robot with a Lie Mask
    Takuya HASHIMOTO,
    Sachio HIRAMATSU,
    Toshiaki TSUJI,
    Hiroshi KOBAYASHI
14. Amplitude Control in van der Pol Type Self-excited Micro Cantilever for AFM
    Keiichi HAYASHI,
    Kiwamu ASHIDA,
    Hiroshi YABUNO,
    Masaharu KURODA
15. The Square Cup Deep Drawing by Variable Blank Holder Force
    Satoshi KITAYAMA,
    Satoshi HAMANO,
    Koetsu YAMAZAKI,
    Tatsuo KUBO
    Hikaru NISHIKAWA,
    Hiroshi KINOSHITA
16. Development of Angular Position-Controllable Fluid-Driven Spindle and Its Angular Position Control
    Yohichi NAKAO,
    Naoya ASAOKA,
    Masayoshi FUJIMOTO

1. Drill for Machining Ultra-deep Micro Holes)
   Takeshi AKAMATSU, Akira YOSHIMURA,Haruki KINO
   (Hitachi Tool Engineering, Ltd.
2. Development and Commercialization of Patient-specific High-precision Robotic Surgical Simulator
   Seiichi IKEDA(FAIN-Biomedical,Inc.),
   Toshio FUKUDA(NAGOYA Univ.)
3. Hybrid System for Construction Machine
   Hiroaki INOUE,Yoshitaka NIIGAKI,Takayoshi ENDO,
   Teiichirou CHIBA,Jun MORINAGA(Komatsu Ltd.)
4. Design Technology to Realize Pleasant Product Sounds
   Koichi OTOMI,Rika HOSAKA (Toshiba Corp) ,
   Yoshiyuki IWATA(Toshiba Home Appliances Corp),
   Hideyoshi YANAGISAWA(The University of Tokyo)
5. Railway Trucks for Continuous Measurement of Derailment Coefficient and Observation Systems Using Such Trucks on In-serve Trains
   Makoto SHIMIZU(Tokyo Metro Co. Ltd),
   Akira MATSUMOTO(Emeritus Researcher of National Traffic Safety & Environment Laboratory),
   Hiroyuki ONO(National Traffic Safety & Environment Lab),
   Yoshi SATO(Sumitomo Metals Industries Ltd.),
   Masuhisa TANIMOTO(Sumitomo Metal Technology Inc.)
6. Development of an Intelligent Machining System for Detecting and Suppressing Milling Chatter
   Harumitsu SENDA,Hiroshi INAGAKI,
   Hiroshi UENO,Akihide HAMAGUCHI,
   Mamoru YAMASHITA(OKUMA Corporation)
7. A Newly Developed CVT with an Auxiliary Transmission for Compact Vehicle
   Haruhisa NAKANO,Hiroyasu TANAKA,Hisashi SAITO,
   Takehiro UN’NO(JATCO Ltd),
   Yuzuru TOTA (NISSAN MOTOR CO.,LTD.)
8. Production System of Ultrawide Optical Films Used in Liquid Crystal Displays with Roll-to-Roll Transportation
   Shinji HIKITA,Daisuke FUJIKURA(FUJIFILM Corporation),
   Takashi NAWANO(FUJIFILM Opto Materials CO., LTD.),
   Tadashi SASAKI(FUJIFILM Corporation),
   Hiromu HASHIMOTO(Tokai University.)

1. Characterization of the Motor Protein Prestin , a Candidate Molecule Driving Biomicro Actuators
   Shun KUMANO
2. A study on biomechanics of liver reconstruction by three-dimensional culture and microfluidic devices
   Ryo SUDO
3. A Study on a Homogenization Theory for Microscopic Buckling Analysis of Periodic Cellular Solids and its Application
   Dai OKUMURA
4. Study of hydrogen embrittlement based on the interaction between dislocations and hydrogen
   Shinya TAKETOMI
5. A Study on Preparation of Carbon Nanotube Reinforced Aumina Composites and Examination of Their Fracture Mechanisms
   Go YAMAMOTO
6. A Study on Premixed Flames Established in Rotating Flows
   Daisuke SHIMOKURI
7. A Study on Bubble Growth and Collapse during Subcooled Boiling on MEMS Heat Transfer Surfaces
   Manabu TANGE
8. A Study on Length Scale of Si Nano Transistor under Non-Equilibrium State between Election and Lattice Energy
   Tomoyuki HATAKEYAMA
9. A Study on Flame Synthesis of Fluorescent Nano-Particles
   Takeshi YOKOMORI
10. A Study on Mass Transfer at Gas-Liquid and Gas-Solid Interface
    Kenji TANNO
11. A Theoretical Study on Development of Functions in Nanomaterials Based on Quantum and Molecular Fluid Science
    Kentaro DOI
12. A Study on Methods of Aerodynamic Sound Source Identification by Wind Tunnel
    Nobuhiro YAMAZAKI
13. A Study on Direct Simulation of Tonal Sound in Cavity Flows
    Hiroshi YOKOYAMA
14. A Study on Motion and Control of Tethered System with Large Deformation and Large Displacement
    Shoichiro TAKEHARA
15. A Study on Tactile Sensing Utilizing Mechanism of Human Tactile Perception Based on Skin Structure
    Yoshihiro TANAKA
16. A Study on Suppression of Self-Exited Vibration Generated in Mechanical Systems Using Dynamic Absorber
    Yutaka NAKANO
17. A Study on Analysis and Optimization of Fibrous Composite with Locally Anisotropic Structure
    Shinya HONDA
18. Research on Wearable Sensor System for Human Motion Analysis
    Tao LIU
19. Research of Zero‐Spin Disk for Shat Drive CVT
    Yukihito NARITA
20. Redundancy Utilization Control of Hyper Redundant Robot
    Daisuke MATSUURA
21. Development of Disaster Simulation Modeling Methods with GIS
    Yoshikatu AKIYAMA
22. Development of Thermal Fly-height Control Technology for Magnetic Head Slider in Environmental Change
    Satoru OKUBO
23. Development of Design and Evaluation Technology Against Dynamic Loading for Electronic Products.
    Takahiro OMORI
24. Development of Uniform Materials Generation Technology Using Micro-fluidic Devices
    Erika KATAYAMA
25. Development of Experimentally Objective Extraction Method of Vortical Structures in Self-sustained Oscillations and Its Control Method
    Yuta KAWAI
26. Development of the Fuel Saving Method in the Direct Injection Gasoline Engine with Variable Valve Train
    Kengo KUMANO
27. Development of Mechanical Properties Evaluation Technique for FRP Considering the Effect of Fiber Distribution by Molding Processes
    Takahiko SAWADA
28. Development of Simple Measurement Systems for Power Generation Plant
    Atsunobu SUGANO
29. Development of Control Technique for Improvement of Acceleration Reproducibility in Vibration Testing System
    Kenta SEKI
30. Development of a High-Precision System of Non-Destructive Examination with Infrared Thermographic Image for High Heat Flux Material
    Yohji SEKI
31. Development of compact heat-transport-device for high-heat-generating and high-density packaging electronics
    Tomonao TAKAMATSU
32. Development of Noise-Reduction Technology by Clarifying the Relation between Propeller Fan’s Tip Flow Behavior and the Noise
    Seiji NAKASHIMA
33. Development of HDD Shock Evaluation by Capacitance Measurement between Slider and Disk
    Tatsuhiko NISHIDA
34. Development of Thin Centrifugal Fan with Backward Blades for Fan Filter Unit
    Takeshi HONDA
35. Development of Prediction Technique for Natural Frequency of Centrifugal Compressor Impeller in High Pressure Gas
    Yohei MAGARA
36. Development of Separation Mechanism for Various Sized Bills
    Toshifumi MITSUYAMA
37. Development of Universal Escalator
    Masato YOSHIDA
38. Development of Low Rare Metal Content Material for High Temperature Sliding
    Junichi YOSHIHISA

1. Activities on Introductory Engineering Education Program Development and Promotion in Robotics and Mechatronics
   Yoshinobu ANDO,
   Makoto MIZUKAWA,
   Chie KASUGA,
   Takashi YOSHIMI(Shibaura Institue of Technology)
2. Education Program of Multidisciplinary Engineering Capability for Complex System Design
   Department of Mechanical Engineering,Graduate School of Engineering,Osaka University
3. Promotion of Practical Engineering Education by College-Industrial Cooperative Programs
   Cooperative Education Staff of Ichinoseki National College of Technology
4. Seminar on Automobile Vehicle Dynamics
   Takehiko FUJIOKA(The University of Tokyo)
   Ichiro KAGEYAMA(Nihon University)
5. Development of Educational Program for High School Students Collaborated with Industrial Young Engineers
   Committee on Young Engineer Promotion

1. Ozone disinfection cabinet :OR-series (OR-5V & OR-12)
   IHI Shibaura Machinery Corporation
2. Ultra-fast response Ultra-fine & Ultra-thin thermocouples
   ANBE SMT Co.
3. Development of Utility Type CNC Slim Lathe Series
   Takamatsu Machinery CO.,LTD
4. Vertical Machining Center YMC430
   YASDA PRECISION TOOLS K.K.
5. High-Response Linear Servo Valve
   Yuken Kogyo Co., Ltd.

1. Takeshi　OHWE
   (TOSHIBA STORAGE DEVICE CORPORATION)
   Cable-patterned Suspension for HDD
2. Akimitsu　 NAGAE
   (YAMAZAKI MAZAK CORPORATION)
   Proposal and Inplementation of Modular-type High-efficient Manufacturing Systems and Its Core Machine Tools and Components to Respond Quickly to Changeable Customer Needs

1. Surface Conduction Ａnalysis of EMG Signal From Forearm Muscles
   Yasuhiro NAKAJIMA , Satoshi YOSHINARI and Shigeru TADANO
2. Tensile Properties of Cultured Aortic Smooth Muscle Cells Obtained in a quasi-in situ Tensile Test with Thermoresponsive GelatinKazuaki NAGAYAMA , Akira TSUGAWA and Takeo MATSUMOTO
3. Measurement of Opening Displacement and Stress Intensity Factor of Bifurcated Notch by Moiré Interferometry
   Shinichi SUZUKI and Tomotaka MIYASHITA
4. Effect of the Microstructure on the Fracture Mode of Short-fiber Reinforced Plastic Composites
   Masaaki NISHIKAWA , Tomonaga OKABE and Nobuo TAKEDA
5. A Structural Optimization Method Incorporating Level Set Boundary Expressions Based on the Concept of the Phase Field Method
   Takayuki YAMADA , Shinji NISHIWAKI , Kazuhiro IZUI , Masataka YOSHIMURA and Akihiro TAKEZAWA
6. Modeling of Solid Oxide Fuel Cell Anode Using Stochastic Reconstruction and Lattice Boltzmann Method
   Yoshinori SUZUE , Naoki Shikazono and Nobuhide KASAGI
7. Development of Time-scale Interaction Combustion Model for Gasoline and Diesel Engines
   Atsushi TERAJI , Yoshihiro IMAOKA , Tsuyoshi TSUDA , Toru NODA , Masaaki KUBO and Shuji KIMURA
8. Estimation of Radiative Properties for Human Skin by Reflection Profile Measurement
   Jun YAMADA , Yuichi ARITA , Akihiro AHN , Yoshimasa MIURA and Sadaki TAKATA
9. Tomogram Visualization of Supersonic Jet Noise Using an Optical CT Method
   Mikiya ARAKI , Yusuke SONE , Takayuki KOJIMA ,Hideyuki TAGUCHI , Seiichi SHIGA and Tomio OBOKATA
10. Kriging-Model-Based Multi-Objective Robust Optimization and Trade-Off Rule Mining of a Centrifugal Fan with Dimensional Uncertainty
    Kazuyuki SUGIMURA , Jeong SHINKYU , Shigeru OBAYASHI and Takeshi KIMURA
11. A Design Method for Dynamic Vibration Absorbers Consindering Excitation Frequency Range
    Yoshio INOUE and Kyoko SHIBATA
12. Tactile Sensing Using an Electronic Circuit Causing Stochastic Resonance
    Masahiro OHKA and Shingo KONDO
13. Topology Optimization of Sound Absorbing Material in Acoustic Cavity for Minimization of Sound Pressure Response
    Takashi YAMAMOTO , Shinichi MARUYAMA , Shinji NISHIWAKI and Masataka YOSHIMURA
14. Study on Car Body Tilting System Using Variable Link Mechanism (2nd Report, Tilting Control Design Based on the Strategy of Perfect Tilting Condition)
    Hidehisa YOSHIDA , Masao NAGAI , Syunsuke SIOMI and Takeshi SUEKI
15. The Influence of Micro-grooves for Friction Dependent on Sliding Velocity in Slide Bearing Under Oil Lubrication
    Shotaro OZU , Takayuki TOKOROYAMA , Atsushi KORENAGA , Shinya SASAKI and Noritugu UMEHARA
16. Design of a Hexahedron-octahedron Based Spherical Stepping Motor
    Tomoaki YANO

1. Cleaning Robot System for Building
   Hajime AOYAMA , Kazuyoshi ISHIKAWA , Yoshinori ADACHI , Hirokazu TAKATO , Itsuo NISHIHARA (Fuji Heavy Industries Ltd.)
2. Distance Control Assist System with Active Accelerator Pedal
   Ken KIMURA , Yasuhiko TAKAE , Ando HIKARU , Takeshi SUGANO , Kazunori KURATA(Nissan Motor Co., Ltd.)
3. Airflow Uniformity Improvement Technology for Compact High-Efficiency Blower Fan
   Masaharu SAKAI , Toshinori OCHIAI(DENSO CORPORATION) , Yasushi MITSUISHI (NIPPON SOKEN, INC)
4. Development of a 2.0-L Direct-Injection Diesel Engine Complying with Japan’s Post New Long-Term Exhaust Emission Regulations
   Takahi SHIRAKAWA , Eiji AIYOSHIZAWA , Mio Ikeda , TOSHIMASA Koga , Shuhei YONEYA(Nissan Motor Co., Ltd.)
5. Train-draft-cooling Power Converters for Bullet Trains : A Blowerless Converter/inverter
   Takafumi FUKUSHIMA(Central Japan Railway Company) , Katsuya UMEDA(Toshiba Corporation) , Takeshi TANAKA(Hitachi, Ltd.) , Takashi KAMEDA(Mitsubishi Electric Corporation) , Jun KANDA(Fuji Electric Systems Co., Ltd.)
6. Air-conditioning System Individually Controlled Temperature and Humidity
   Nobuki MATSUI , Tomohiro YABU , Syuuji IKEGAMI , Takashi TAKAHASHI , Yoshinori NARIKAWA(Daikin Industries, LTD.
7. Simulation Technology for Digital Mockup Based Mechatronics Control Software Development
   Mitsunobu YOSHIDA , Koichi KONDO(Toshiba Corp) , Shoichi MOTOHASHI(InterDesign Technologies, Inc.)

1. Application of Computational Mechanics to Physiologcal Flows
   Yohsuke IMAI
2. Study of Remote Tactile Transmission through Master-slave Robot System
   Masashi KONYO
3. Optimal Wheelchair Design Based on Residual Motor Function and Physical Load of Upper Limb
   Makoto SASAKI
4. Study on Patient-specific Image-based Mechanical Analysis of Bone Considering Its Inhomogeneous Properties
   Daisuke TAWARA
5. High Temperature Fatigue and Microstructural Evolutions in Single Crystal Ni-base Superalloy
   Motoki SAKAGUCHI
6. Study on Unique Mechanical Properties of Nanostructured Materials Based on The Evolotion and Structrual Change of Lattice Defects Using Atomic Scale Computational Experiments
   Tomotugu SHIMOKAWA
7. Wireless Structural Health Monitoring of Composite Materials Using Electrical Characteristic Change
   Ryosuke MATSUZAKI
8. Full-field Measurement of Deformation Distribution of a Porcine Mandibular Periodontium under Simulated Dental Occlusion
   Yasuyuki MORITA
9. A study on Simulation of Mechanical Properties and Microstructural Evolutions for Steel based on Phase-Field Method
   Akinori YAMANAKA
10. Real-time Sensing and Control of Thermophysical Property in Microscale
    Masahiro MOTOSUKE
11. Study on Small Size Gas Engine System Using Gas Fuel Produced From Biomass
    Yudai YAMASAKI
12. Study on Thermal-Hydrautic Analysis Method for Design Feasibility and Safety Assessment of Nuclear Reactor Components
    Akihiro UCHIBORI
13. Control and Measurement of Interfacial Phenomena Using MEMS Fluidic Devices
    Hirofumi SHINTAKU
14. Experimental Study of Aerodynamic and Aeroacoustical Characteristics of Unsteady Two-Dimensional Airfoil Flows
    Yasumasa SUZUKI
15. Study on Direct Numerical Simulation of Drag-Reducing Turbulent Boundary Layer of Viscoelastic Fluid
    Shinji TAMANO
16. A study of a Microscopic Process on Bubble Nucleation-Growth Phenomena
    Shinichi TSUDA
17. Analyzing Method of Vibro-Acoustic System and Structural Optimization
    Kohei FURUYA
18. Research of Vibration Reduction of DC Brushless Motor for Electric Power Steering
    Takashi MIYOSHI
19. Study on Joint Torque-Velocity Pair based Manipulability for Manipulators
    Tetsuyou WATANABE
20. Development of Peristaltic Clawing Robot based on Earthwarm Locomotion
    Taro NAKAMURA
21. Development of Technology for Tracking Vibration Modes Using Image Operation
    Hirohisa ENOMOTO
22. Development of Highly Reliable Jisso Technologies of Optical and Semiconductor Components in Slim Optical Pickups
    Manabu OCHI
23. Development of Fatigue Evaluation Method for Railway Wheel under Multiaxial Stress State
    Takanori KATO
24. Development of Shock Design Technique for Mobile Devices
    Toru KITAMURA
25. Development of an Adoptive Body Supporter and a Training Equipment with Adaptive and Learning Mechanism Using Balloon Actuator-Sensor System
    Ryota KUROZUMI
26. Study on the Mechanism of Cargo Damage Caused by the Vibration of Truck Box in Transport, and Development of Truck Box with Reduced Vibration
    Kozue KOBAYASHI
27. Development of Actuators for Hard Disk Drives to Improve Cost Performance
    Kenji SUZUKI
28. Development of Amplifying Flow Type Large-Flow Proportional Seat Valve for Using Ultra Large Hydraulic Excavator
    Kazuo TAKIGUCHI
29. A study on Radiative Transfer in Latent Heat-Storage Material for Optical Measurement of Solidification Rate
    Takahiro TANAKA
30. Development of Slider-Based Micro-actuator for Magnetic Disk Drive
    Yusuke NOJIMA
31. Mechanism study of Magnetic Damage in Perpendicular Magnetic Recording Medium for Hard Disk Drives by Nano Scratching
    Masaru FURUKAWA
32. Development of a Continuous Flow Microwave-Assisted Chemical Reactor
    Mitsuhiro MATSUZAWA
33. Development of High-Perfomance Feeding Technology for Mail Processing Machines
    Yusuke MITSUYA
34. Robust Laser Interferometer System against the Fluctuation of Air-Refractive-Index
    Kaoru MIYATA
35. Development of Fatigue Crack Growth Evaluation under Repeated Large Deformation
    Takehisa YAMADA

1. Planning and Continuous Hosting of Technical Tours Related to Mechanical Engineering and Energy for Children and Parents
   Planning Committee of JSME Power and Energy System Division
2. Intensive Introductory Engineering Education Seminar for University Students by University-Industry Alliance
   Taichi SATO(Tokyo Denki University) ,Akihiro MATSUMOTO(Toyo University) ,
   Hiroshi TAKAHASHI(Shonan Institute of Technology) ,
   Kenji SUZUKI (Kogakuin University) ,
   Hiroshi IGARASHI(Tokyo Denki University)
3. Planning and Implementation of The Educational Program for Younger Engineers in Manufacturing (Mono-Dzukuri) Industries
   TOYOTA INDUSTRIES CORPORATION Technical Learning Center
4. Creative Design・Mechatronics Exercise for Mechanical Engineers
   Tetsuya HAMAGUCHI , Naohiko SUGITA , Motoki SHINO , Hideyoshi YANAGISAWA (The University of Tokyo)

1. ” Electric Gripper “ESG1 Series””
   Taiyo, Ltd.
2. ” High-pressure Enzyme Reactor – TOTAL EXTRACTION”
   TOYO KOATSU Co.,Ltd.
3. ” Portable Driving Check System “Access Checker Mini” & Driving simulator ”
   Hitachi KE Systems, Ltd.
4. ” Magnetic coupling NEMO pump”
   HEISHIN Ltd.
5. ” Multi-tasking Machine INTEGREX i-150″
   YAMAZAKI MAZAK CORPORATION

1. Takashi YONEKAWA (TOYOTA MOTOR CORPORATION)
   Research and Development of Active Safety Technology to Decrease Traffic Accidents

1. Development of three-Dimensional Microstages Driven by Comb Actuators (Evaluation of Basic Performance Using Atomic Force Microscope)
   Yasuhisa ANDO
2. Remodeling of Endothelial Cell Nucleus Exposed to Three Different Mechanical Stimuli
   Toshiro OHASHI, Kazuhiko HANAMURA, Daisaku AZUMA, Naoya SAKAMOTO and Masaaki SATO
3. Designs of Aluminum Beverage Can Ends Considering the Finger Accessibility When Opening Cans
   Jing HAN, Sadao NISHIYAMA, Koetsu YAMAZAKI and Ryuichi ITO
4. Stress Singularity Analysis at an Interfacial Corner Between Anisotropic Bimaterials Under Thermal Stress
   Yoshiaki NOMURA, Toru IKEDA and Noriyuki MIYAZAKI
5. Influence of Structure and Composition on Dynamic Viscoelastic Property of Cartilaginous Tissue: Criteria for Classification between Hyaline Cartilage and Fibrocartilage Based on Mechanical Function
   Shogo MIYATA, Tetsuya TATEISHI, Katsuko FURUKAWA and Takashi USHIDA
6. Re-initiation Processes of Detonation Wave Behind Slit-Plate (Visualization of Re-initiation and Quenching Processes of Detonation Wave)
   Tetsuro OBARA, Yutaka TSUKADA, Jayan Sentanuhady and Shigeharu OHYAGI
7. Molecular Dynamics Study on Ultra-Thin Liquid Film Sheared between Solid Surfaces (Influence of the Crystal Plane to Energy and Momentum Transfer at the Solid-Liquid Interfaces)
   Daichi TORII and Taku OHARA
8. On Heat Transfer Mechanism of Nucleate Boiling with MEMS Sensors (1st Report, Temperature Measurement beneath Boiling Bubble)
   Osamu NAKABEPPU and Yuta FURUKAWA
9. Turbulence Structure in the Airflow Over Progressive Wind Waves
   Naoto KIHARA , Hideshi HANAZAKI , Hiromasa UEDA and Toru MIZUYA
10. Effects of Unstable Oblique Modes on the Acoustic Filed in a Supersonic Plane Turbulent Jet
    Daisuke WATANABE , Hiroshi MAEKAWA and Yuichi MATSUO
11. Vertical Vibration Suppression of Railway Vehicle by Primary Suspension Damping Force Control(Results of Running Tests Using Shinkansen Vehicle)
    Yoshiki SUGAHARA, Akihito KAZATO , Tanahiro TOMIOKA and Mitsuji SANPEI
12. A study on the Oil Whip of a Rotor Supported in Tilting-Pad Journal Bearings
    (1st Report , Experimental Results and Theoretical Validation)”
    Hiroo TAURA and Masato TANAKA
13. Mode Localization Control of a Periodic Structure
    Nobuo TANAKA , Yohei MURASE and Hiroyuki IWAMOTO
14. Dynamic Absorber for Ropeway Gondola using Coriolis Force
    Hiroshi MATSUHISA , Hideo UTSUNO and Mitsunori ISONO
15. General Characteristics of Vibration of Gears with Convex Form Modification of Tooth Flank (1st.Report, General Model of Meshing Condition of Gears)
    Masaharu KOMORI, Hiroaki MURAKAMI and Aizoh KUBO
16. Lubrication Mechanism of Near-dry Machining
    Satoshi FUJIMURA , Ichiro INASAKI , Toshiaki WAKABAYASHI and Satoshi SUDA

1. Ceramic coating technology at room temperature using the aerosol deposition method, and the commercialization development for an anti-plasma corrosion coating
   Jun Akedo, Hisato Ogiso( National Institute of Advanced Industrial Science & Technology), Masakatsu Kiyohara , Hironori Hatono , Junichi Iwasawa (TOTO Co. Ltd.)
2. The Permanently engaged gear mechanism in TOYOTA Stop & Start System (Idle stop system)
   Toshiaki Asada, Kazuaki Sugimura, Kazuhito Sakai, RyosukeNagata(TOYOTA MOTORCORPORATION) DETAIL
3. Development of Variable Valve Event and Lift System (VVEL)
   Shinichi Kiga, Yuzo Akasaka, Takeshi Arinaga (NISSAN Motor Co., LTD),Seiji Tsuruta,Keisuke Takeda (Hitachi, Ltd., Automotive Systems)
4. Development of VR Resolver system for hybrid electric vehicles
   Kanji Kitazawa, Hisashi Mimura, Hiromi Makiuchi, Hiroshi Kushoihara, Akira Suganuma (Tamagawa-seiki Co,.ltd.)
5. Development of high-accuracy Image-Guided Radiation Therapy Equipment with compact C-band accelerator
   Etsuro Hirai, Yuichiro Kamino(Mitsubishi Heavy Industries, Ltd.), Masahiro Hiraoka(Kyoto University), Masaki Kokubo(Institute of Biomedical Research and Innovation)
6. Development of high head multi-stage pump with large capacity for large-scale water supply system
   Shiro Matsui, Shinsuke Sakurai, Takahide Nagahara, Shinji Imaoka, Tomohiro Naruse(Hitachi Plant Technologies, Ltd.)
7. Development of the compact size steam-electric generator, using the load change of steam flow and a small amount of steam
   Toshiya MIYAKE,Masaki MATSUKUMA,Takayoshi MATSUI,Hajime NAKAMURA,Hideaki KUWABARA(Kobe Steel, Ltd.)
8. Development of compact and lightweight laser range sensor for the application in service robot
   Toshihiro Mori (Hokuyo Automatic Co.,Ltd.), Shinichi Yuta (University of Tsukuba)

1. Study on prestin , the motor protein of outer hair cells in the inner ear , with the aim of developing a bio-microactuator
   Koji IIDA
2. Molecular Dynamics Study on Mechanisms of Changes in Cell Membrane Permeability and Subsequent Molecular Delivery Induced by Shock Waves
   Kenichiro KOSHIYAMA
3. A study on the Structual Damage Investigation System without Prior Information about Damage
   Atsushi IWASAKI
4. Study on multi-scale modeling lf mechanical behaviors of polymer and polymerblend and its application
   Makoto UCHIDA
5. A study of mechanical characterization of brain tissue in impact loading regime and constitutive modeling
   Atsutaka TAMURA
6. Material Characterization and Mechanical Modeling of Automobile Materials with Microstructure Effect
   Hiroyuki MAE
7. Development of experimental and numerical approaches to evaluating structural safety of carbon fiber reinforced plastics
   Shigeki YASHIRO
8. A Research on Environment Load Reduction and Measurement Technique Development in Automotive and Aircraft Engines
   Mikiya ARAKI
9. A Study of Ignition and Combustion Mechanisms in a Homogeneous Charge Compression Ignition Engine by using Spectroscopic Measurements
   Akira IIJIMA
10. A Molecular Dynamics Study on the Local Structure of Liquid-Vapor Interface of Water and Lennard-Jones Fluid
    Gota KIKUGAWA
11. Evaluation of Gas Entrainment Phenomena in Reactor Vessel based on Numerical Simulation
    Kei ITO
12. Promotion of Fluid Mixing and Chemical Reaction in Liquid Flows
    Yasuhito ITO
13. Integrated Numerical and Experimental Analysis on Optimization of Nano/Micro Particulate Supersonic Jet Processes under Extreme Conditions
    Hidemasa TAKANA
14. Research on modeling of turbulent mass transfer across interfaces with a variety of dynamical conditions
    Yosuke HASEGAWA
15. Development of Operation Assistance System on Sidewalk to Improve Accessibility and Stability of Resident in a Snowfall Area
    Mtotoki SHINO
16. Hamiltonian Formulation for Sloshing in Layered Two Immiscible Fluids
    Kensuke HARA
17. Self-Synchronized Phenomena Generated in Mechanical Systems
    Hiroki MORI
18. Devolpment of Gel-structured ER Fluids and its Application to Micromachining System
    Yasuhiro KAKINUMA
19. Development of the ”Omni-Ball” : Spherical Omnidirectional Wheel to Realize High Mobility
    Kenjiro TADAKUMA
20. The Clarification of Superlow Friction Phenomena of Carbon Nitride Coating , and Application of the Coating in the Atmosphere
    Takayuki TOKOROYAMA
21. Molecular Dynamics Study for Verification of Coverage Measurement Method for Molecurly Thin Lubricant Films
    Yoshiaki IKAI
22. Development of design technology by using mixed lubrication analysis for friction reduction of compressor in air conditioner
    Yasutaka ITO
23. Development of Laser Resin Welder for Turbo Fan as a Mass Production Equipment
    Daisuke URABE
24. Development Numerical simulation Scheme for flows on a Vortex Method
    Satomi OHTA
25. Development of Direct Circuit Formation Technology by Electrophotography
    Yuichiro SANO
26. Development of a GUI Interface Device with Direct Manipulation for Blind Computer Users
    Shigenobu SHIMADA
27. Development of stable-flying slider technologies for near-contact region flying
    Yuki SHIMIZU
28. Development of Heat Dissipation and Mounting Technologies of LED Module
    Kimihiko SUDO
29. Development of a high performance commercial refrigeration system using carbon dioxide
    Kazuyoshi TOMOCHIKA
30. Development of Cooling Design Technologies Applying for Optical Disc Drives
    Hiroyuki TOYOTA
31. Computational Modeling and Evaluation of Viscoelastic Deformation Behavior of Filled-Rubber
    Masato NAITO
32. Development of a Service Robot with Leg-Wheel Mechanism
    Ryousuke NAKAMURA
33. Fracture Criteria of FRP at Cryogenic Temperature
    Toshio MIYATAKE

1. Writing literary work of mechanical engineering books for beginners
   Kazuo KADOTA (Tokyo Tech High School of Science and Technology)
2. Summer Seminar of Engineering Design for Collaborated Team of Students and Engineers
   Executive Committee for Summer Seminar of Enginnering Design
3. Precision Grinding Education for High School Students to be Future Engineers with World-wide perspectives
   – Presentation by High School Students at the Japan Society of Mechanical Engineers and International Conferences –
   Yuichi HASUDA (Tochigi prefectual Utsunomiya Technical High School)
4. REDEEM-Recurrent Education for Development of Engineering Enhanced Medicine-
   Takami YAMAGUCHI (Tohoku University)

1. “KITO LEVER BLOCK MODEL L5”
   KITO CORPORATION
2. “Swing Mixer System”
   JFE Engineering Corporation
3. “Simulated fuel assembly for nuclear reactors”
   Sukegawa Electric Co., Ltd.
4. “RAILCAR DRIVE SHAFT (UNIVERSAL JOINT)”
   Nakamura Jico Co., Ltd.
5. “Novel Static Mixing/Dispersion Modules”
   Fujikin Inc.

1. Masaaki NISHIWAKI (TOYOTA MOTOR CORPORATION)
   Research and Development on Brake Noise Reduction Technology for Higher Brake Performance

1. Design Method of Porous Scaffold Using Computational Simulation for Bone Regeneration
   Taiji ADACHI, Yuji KAWANO, Yuji KAWANO, Yoshihiro TOMITA
2. Newly Designed Tensile Test System for in vitro Measurement of Mechanical Properties of Cytoskeletal Filaments
   Shinji DEGUCHI, Toshiro OHASHI and Masaaki SATO
3. Formulation of the Coupling Effects among Phase, Temperature and Stress by Using the Phase Field Model.
   Takuya UEHARA, Takahiro Tsujino
4. Development of Evaluation Method for Estimating Stress-Induced Change in Drain Current in Deep-sub-micron MOSFETs
   Yukihiro KUMAGAI, Hiroyuki OHTA, Hideo MIURA, AkihiroSHIMIZU, Shiro KAMOHARA, Kenichi MAEKAWA
5. Development of Newly Designed Ultra-Light Core Structures
   Taketoshi NOJIMA, Kazuya SAITO
6. Response Compensation of Fine-Wire Temperature Sensors
   Masato TAGAWA, Kenji KATO, Yasuhiko OHTA
7. Regime Variation of Spray Combustion on Homogeneous Turbulence
   Yuya BABA, Fumiteru AKAMATSU
8. Molecular Gas Dynamics of Condensation Processes of Methanol Vapor behind a Reflected Shock Wave in a Shock Tube
   Takeru YANO, Kazumichi KOBAYASHI, Shigeo FUJIKAWA
9. Evaluation of Feedback Control System for Wall Turbulence with Micro Sensors and Actuators
   Takashi YOSHINO, Yuji SUZUKI, Nobuhide KASAGI
10. Clarification and Achievement of Theoretical Limitation in Vehicle Dynamics Integrated Management
11. Thermally Induced Vibration in Active Magnetic Bearing Supported Flexible Rotor
    Naohiko TAKAHASHI, Haruo MIURA, Yasuo FUKUSHIMA
12. Development of a Sensor System for Collecting Tactile Information
    Yoshihiro TANAKA, Mami TANAKA, Seiji CHONAN
13. Real-Time Planning of Humanoid Robot’s Gait for Force Controlled Manipulation
    Kensuke HARADA, Shuuji KAJITA, Fumio KANEHIRO, Kiyoshi FUJIWARA, Kenji KANEKO, Kazuhito YOKOI, Hirohisa HIRUKAWA
14. Development of Position-Orientation Decoupled Spatial In-Parallel Actuated Mechanisms with Six Degrees of Freedom
    Yukio TAKEDA, Kouji KAMIYAMA, Yoshihisa MAKI, Masaru HIGUCHI, Koichi SUGIMOTO
15. Development of A Simulation System for Sheet Transport Path
    Hui CHENG, Kazushi YOSHIDA, Shingo NORO, Junichi TAMAMOTO, Mitsuru ASADA
16. Development of Electric-Discharge Type Metal Jet Nozzle for Printer
    Katsumi YAMAGUCHI, Hiroshi NAKAMURA

1. Development and Practical Application of General Purpose Parallel Structural Analysis System
   Hiroshi Akiba (Allied Engineering Corporation),Shinobu Yoshimura (University of Tokyo),Hirohisa Noguchi (Keio University),Tomonobu Ohyama (Allied Engineering Corporation),Takashi Kawakami (Toyama Prefectuctural University)
2. Development and Realization of Rotary Anode Type X-ray Tube UsingLiquid Metal Lubricated Bearings forHigh Speed Medical CT
   Mitsuo Iwase1, Hironori Nakamuta1, Harunobu Fukushima2, Yasuo Yoshii2, Hitoshi Hattori2
   1 Toshiba Electron Tubes & Devices Co., Ltd.,
   2 Corporate Research & Development Center, Toshiba Corporation
3. Development of the Series N700 Shinkansen train – Instillation of the body inclining system and energy conservation
   S.USUI, M.UENO, A.TORII,( Central Japan Railway Company)
4. Device of Suppressing Abnormal Flow Phenomena in Turbomachinery (J-Groove Device)
   Junichi Kurokawa, Jun Matsui, Yokohama National University
5. Development of the measuring system on multi-stage injection rate and quantity for diesel injection pump
   Akio Takamura, Masamichi ONO, Yukimitsu Omori, Susumu Fukushima, Satoshi Ishikawa (ONO SOKKI Co., Ltd.)
6. Large Deployable Reflector (LDR) onboard Engineering Test Satellite VIII (ETS-VIII)
   Akio Tsujihata, Koji Terada, Akira Meguro, Motofumi Usui, Kyoji Shintate(Japan Aerospace Exploration Agency)
7. Development of Advanced PCS (Pre-Crash Safety) System
   Setsuo Tokoro, Masayuki Shimizu, Masayuki Usami, Kazushi Kuroda, Kiyoka Matsubayashi(TOYOTA MOTOR CORPORATION)
8. Development of linear motor driven Double-Column Machining Center incorporating a thermal displacement compensation system
   Seiji Furuhashi, Koji Takenaka, Tokio Kamada, Ryuuei Hakamata, Yoichi Kawai　(Okuma Corporation)

1. Development of blood vessel model for investigating effect of hemodynamic conditions on mechanism of atherogenesis
   Naoya SAKAMOTO (Tohoku Univ.)
2. Biomechanics research on role of cytoskeletal structure in cellular mechanosensing mechanism and cytoskeletal remodeling induced by mechanical stimulus
   Katsuya SATO (Yamaguchi Univ.)
3. A Study on an Energy Transmission System for a　Totally Implantable Artificial Heart
   Kenji SHIBA (Hiroshima Univ.)
4. A Study on Mechanical Property Measurement and Microstructural Imaging of Auditory Sensory Cells by Atomic Force Microscopy
   Michio MURAKOSHI (Tohoku Univ.)
5. Morphology and Fracture Property of Epoxy Resins　and Composites
   Wakako ARAKI (Tokyo Institute of Technology)
6. Investigation of Strength Degradation Mechanism of Fiber Reinforced Plastics under Water Environment
   Akira KOBIKI (IHI Co.)
7. Study of Deformation and Fracture Mechanisms of Non-Crystalline and Nano-crystalline Metals Based on Atomistic Models
   Ryosuke MATSUMOTO (Kyoto Univ.)
8. Investigation of a　Traveling-Wave thermoacoustic refrigerator
   Yuki UEDA (Tokyo University of Agriculture and Technology)
9. Study on Mixture Formation, Ignition, and Combustion
   Taku TSUJIMURA (National Institute of Advanced Industrial Science and Technology)
10. Study on flamelet characteristics and soot formation behavior in spray flames
    Hiroaki WATANABE (Central Research Institute of Electric Power Industry)
11. Numerical investigation and modeling of turbulent transport and collision growth of inertial particles
    Ryo ONISHI (Japan Agency for Marine-Earth Science and Technology)
12. Development of miniaturized fiber-optic laser Deppler velocimetry sensor for local flow velocity measurement including blood
    Tsutomu TAJIKAWA (KANSAI Univ.)
13. Study on the Generation of Uniform Diameter Microbubbles in an Ultrasonic Field
    Toshinori MAKUTA (Yamagata Univ.)
14. Clarification and Suppression of Flow Fluctuations around a Steam Control Valve
    Ryo MORITA (Central Research Institute of Electric Power Industry)
15. Investigations and Suppression of Side Load in Rocket Nozzles during Start up and Shutdown Transients
    Koichi YONEZAWA (OSAKA Univ.)
16. Active wave control of a flexible beam using a wave filtering method
    Hiroyuki IWAMOTO (Tokyo Metropolitan Univ.)
17. Study on Mathematical Analysis and Control System to Automatic Pouring System in Casting Industry
    Yoshiyuki NODA (Toyohashi University of Technology, faculty of Engineering)
18. Approach to Essence of Human Force Sensation based on Psychophysical Experiments Using Virtual Reality Technologies and Its Applications
    Msayuki HARA (YOKOHAMA NATIONAL Univ.)
19. Modeling of Multilayered Structures on the Coupling Surface between a structure and an Acoustic Cavity
    Takashi YAMAMOTO (Nissan Motor Co.Ltd.)
20. Environmental Impact Assessment for Machine Tool Operations
    Hirohisa NARITA (Nagoya Institute of Technology)
21. Development of　Robot Conveying Medicine Container by Connect
    Kazuyoshi Ishikawa (Fuji Heavy Industries Ltd.)
22. Development of a Numerical Simulation Scheme for Internal Multiphase Flows by a Vortex Method and a Particle Trajectory Tracking Method
    Yashiyuki ISO (IHI Co.)
23. Development of Motorized-Four-Wheel-Drive Control Technology
    Shinya Imura (Hitachi, Ltd.)
24. Development of a Technique for Designing Multilayer Thin Film Structures with a Multiscale Simulation
    Yasutaka Okura (Hitachi, Ltd.)
25. Development of carbody structures for partial and low floor light rail vehicle
    Shogo OKOCHI (Kinki sharyo Co.,Ltd.)
26. Development of crush method for automotive omposite hood
    Atsushi KATAOKA (Toray Industries, Inc.)
27. Enhanced Heat Transfer Module with a Porous plated Boiling Surface
    Hitoshi SAKAMOTO (NEC Co.)
28. Development of the measurement and evaluation technique of lubricating conditions  between swashplate and shoe in the swashplate compressor for automotive air conditioning
    Hisashi SUZUKI (SANDEN Co.)
29. The Development of Suppression Controller for Crane System with Superior Operation
    Makio SUZUKI (SINTOKOGIO, Ltd.)
30. Development of water-cooled heat sink using lotus-type porous copper
    Hiroshi CHIBA (Mitsubishi Electric Co.)
31. Development of small specimen testing technique and its application to strength evaluation of spot weld of steel sheets for automotive body
    Eisuke NAKAYAMA (Sumitomo Metal Industries, Ltd.)
32. The development of a water hydraulic axial piston pump
    Hideaki NISHIDA (Mitsubishi Heavy Industries, Ltd.)
33. Development of active vibration control system for high-speed elevators using  operational modal analysis
    Naoki NOGUCHI (Hitachi, Ltd.)
34. Development of yarn winder technology for improvement of take-up speed
    Kunihiro MISHIMA (Toray Industries, Inc.)
35. Development of new active steer device for vehicle
    Kosuke YAMANAKA (JTEKT Co.)
36. Analysis Technique Development in a High Precision Reduction Gear Assembly
    Kazuhiko YOKOJI (Nabtesuco Co.)
37. Control of 6 DOF Active Vibration Isolation Devices Using Pneumatic Actuators with Long Piping System
    Masaomi WADA (Hitachi, Ltd.)

1. 1. Instrumentation and control education based on Problem Based Learning(PBL) method about small size biomass energy conversion systems
   Shigehiko KANEKO, Tatsuro WATANABE, Yudai YAMASAKI (University of TOKYO)
2. Literary work of internal combustion engine, heat transfer and combustion
   Hidenori TASAKA
3. Promotion of mechatronics education in Hokkaido by Robot-triathlon
   Robot-triathlon steering committee
4. Graduate Education Program of Design and Integration Capability
   Department of Mechanical Engineering Graduate School of  Engineering Osaka University
5. Distinguished Text books of “Creative Robot Design A: For Novice Robotics Engineers”, “Creative Robot Design B: Deepen your ideas for Robotic Engineering”, “Creative Robot Design C: Beginning Robot Control and Embedding Computers”
   Kan YONEDA (Chiba Institute of Technology), Takashi TSUBOUCHI (University of Tsukuba), Hisashi OHSUMI (Chuo Univ.)

1. “Electric Discharge Sampling Equipment”
   Kobe Material Testing Laboratry Co.,Ltd.
2. “Cycle Tree – Multi-Level Mechanical Bicycle Parking System”
   JFE Environmental Solutions Corporation
3. “Small Rotary Snow-removing Car with Improved Operability and Safety”
   NIIGATA TRANSYS Co., Ltd.
4. “LARGE INTEGRATED FORGINGS FOR POWER PLANT”  (Forgings for Reactor Pressure Vessel and Steam Turbine)
   The Japan Steel Works, Ltd. Muroran plant
5. “The NMV5000 DCG High-Precision, 5-Axis Control Vertical Machining Center”
   Mori Seiki Co., Ltd.

1. Toshihide Igari (Mitsubishi Heavy Industries,Ltd.)
   High temperature strength reseach and application to Practical components
2. Soichi Matsushita  (TOYOTA MOTOR CORPORATION)
   Research and development to realize fuel economy and emission reduction
3. Koichi Yagi (National Institute for Materials Science)
   Acquisition and Publication of Materials Information for Improvement of Reliability due to well-suited Application of Materials

1. Transit Characteristics of a Neutrophil Passing through Two Moderate Constrictions in a Cylindrical Capillary Vessel (Effect of Cell Deformation on Transit through the Second Constriction)
   Atsushi Shirai (Institute of Fluid Science, Tohoku Univ.), Ryo Fujita (Hitachi, Ltd.), Toshiyuki Hayase (Institute of Fluid Science, Tohoku Univ.)
2. Development of Micro-Actuators Driven by Liquid Crystals(1st Report, Generation of Flow and Its Mechanism)
   Shigeomi Chono, Tomohiro Tsuji (Kochi University of Technology)
3. Influence of Proteoglycan on Time-Dependent Mechanical Behaviors of Articular Cartilage under Constant Total Compressive Deformation
   Teruo Murakami, Nobuo Sakai, Yoshinori Sawae (KYUSHU UNIV.), Koji Tanaka (NIKON CORPORATION), Maki Ihara (Previously KYSHU UNIV.)
4. Evaluation of Mechanical Properties and Negative Poisson’s Raito Behavior in Crystalline SiO2 Materials:An Atomisstic Approach
   Hajime Kimizuka (JRI Solutions, Ltd.),Shigenobu Ogata (Osaka Univ.), Yoji Shibutani (Osaka Univ.)
5. Fretting Fatigue under Variable Amplitude Loading below Fretting Fatigue limit
   Yoshiyuki Kondo (KYUSHU UNIV.), Chu Sakae (Religious CO. Hashinobo.), Masanobu Kubota (KYUSHU UNIV.), Hiroki Kitahara(Nissan Motor Co. Ltd.), Kazutoshi Ynagihara (Hitachi Plant Technologies, Ltd.)
6. Cavitation Shotless Peening for Surface Modification of Alloy Tool Steel
   Hitoshi Soyama (Tohoku Univ.), Kei Sasaki (Tohoku Ricoh Co.,Ltd.), Dan Odhiambo (Tohoku Univ.), Masumi Saka (Tohoku Univ.)
7. Eavluation of the Thermophysical Properties of Functionally Graded Materials at High Temperturs by the Photothermal Rediometry
   Akihiko Sano (Japan Broadcasting Corporation), Yuji Nagasaka (Keio Univ.)
8. Effect of Extracellular Ice Formation and Electrolyte Concentration on Injury of Slowly Frozen Cell
   Hiroshi Takamatsu (KYUSHU UNIV.), Sylwia Zawlodozka (James Cook Univ.), Takeshi Miyanaga (Hitachi Plant Technologies, Ltd.)
9. A Study on the Effect of Wall Temperature on Soot Deposition Process from a Diffusion Flame in Microgravity
   Osamu Fujita (Hokkaido Univ.), Choi Joe-Hyeok (Soul National Univ.), Takafumi Tsuiki (Mitsubishi Heavy Industries,Ltd.)
10. Renal Stone Comminution Utilizing Cloud Cavitation Erosion(1st Report, The Control of Cloud Cavitation)
    Teiichiro Ikeda (Hitachi, Ltd.), Shin Yoshizawa (The University of Tokyo), Masataka Tosaki (TOYOTA MOTOR CORPORATION), Yukio Kaneko (Hitachi, Ltd.), Shu Takagi (The University of Tokyo), Yoichiro Matsumoto (The University of Tokyo)
11. An Experimental Study on the Development of Coherent Structure in a Plane Jet (4th Report, Multi-Point Simultaneous Measurement of Two Velocity Components and the Large-scale Structure Model by KL Expansion)
    Nobuhiko Tanaka (Mitsubishi Heavy Industries,Ltd.), Yasuhiko Sakai (Nagoya Univ.), Mutsumi Yamamoto (Toyota Industries Corporation), Takashi Kubo (Nagoya Univ)
12. Autoparametric Responses of an Elastic Structure Carrying a Cylindrical Tank (2nd Report, Influence of the Detuning Parameter)
    Takashi Ikeda, Shin Murakami (Shimane Univ.)
13. Optimal Torque Distribution Algorithm for Redundant Reaction Wheels
    Takehiro Nishiyama (Mitsubishi Electric Co.), Katsuhiko Yamada (Nagoya Univ.)
14. Estimation of Frequency Response Function on Rotational Degrees of Freedom of Structures (Cross FRFs Estimation and Measurement of 6-DOF FRFs)
    Naoki Hosoya (Shibaura Institute of Technology), Takuya Yoshimura (Tokyo Metropolitan Univ.)
15. Development of Micro Lateral Force Sensor Using Tunnelling Current
    Naoki Shiraishi (Olympus Co.), Yasuhisa Ando (National Institute of Advanced Industrial Science and Technology)
16. Study of Shaft Drive Continuously Variable Tramsmission (3rd Report, Increase of Torque – Transmitted Effeciency by Back up Roller)
    Masashi yamanaka, Yukihito Narita, Katsumi Inoue (Tohoku Univ.)

1. The high-grade complex technologies of large capacity, high lift pump system, which transfer river water for long distance
   Yasuo Asano, Takashi Enomoto, Hiroshi Nagasaka, Shinya Hibino, Yasushi Kawai(Ebara Corporation)
2. Diagnostic Technology of Performance of Power Plants Using Laser Torque Sensor
   Shuichi Umezawa (Tokyo Electric Power Company), Hidehiko Kuroda (Toshiba Corporation)
3. Active Flying-height Control of Magnetic Head Slider using MEMS Thermal Actuator
   Masayuki Kurita, Toshiya Shiramatsu (Hitachi, Ltd.),Koji,Hideaki Tanaka (Hitachi Global Storage Technologies Japan, Ltd.),Shozo Saegusa (Hitachi Global Storage Technologies Japan, Ltd. (Currently Hiroshima University))
4. Development of Vertical Type High-Resolution RBS System
   Kazuo Shigekawa, Hirofumi Fukuyama, Shigeto Adachi, Akira Kobayashi (Kobe Steel Ltd.),  Kenji Kimura (Kyoto University)
5. Electronic Active Stabilizer Suspension Syste Development & Realization
   Naoyasu Sugimoto, Shuuichi Buma,Shingo Urababa, Akio Nishihara(TOYOTA MOTOR CORPORATION), Akiya Taneda (AISIN SEIKI Co.,Ltd.)
6. Improvement of curving performance of railway vehicle by onboard friction control system
   Masao Tomeoka (Tokyo Metro Co., Ltd.), Suda Yoshihiro (The University of Tokyo), Kosuke Matsumoto(Tokyo Metro Co., Ltd.), Takuji Nakai (Sumitomo Metal Industries, Ltd.), Masuhisa Tanimoto (Sumitomo Metal Technology, Inc.)
7. Hydrogen-free DLC-Coated Engine Valve Lifter
   Yutaka Mabuchi, Yoshiteru Yasuda, Hiroyuki Izumi, Tomoyuki Koike, Hiroki Hayasaka (Nissan Motor Co. Ltd.)
8. The Development of Runner with Splitter Blade
   Shigenori Watanabe, Morihito Inagaki, Narumi Umeda (Tokyo Electric Power Company), Toshifumi Kurokawa, Yasuyuki Enomoto (Toshiba Corporation)

1. Shinji Deguchi (Okayama Univ.)
   Study of Mechanical Properties of Subcellular Structural Components in Vascular Cells
2. Yusuke Miyazaki (Kanazawa Univ.)
   Construction of a Digital Model for Individual Human Body and its Application to the Method for Injury Prediction
3. Masaki Omiya (Keio Univ.)
   Study on interfacial mechanical model at dissimilar materials and evaluation of interfacial strength
4. Yoichi Takeda (Tohoku Univ.)
   Study on Degradation Mechanisms of Stainless Steels Based on Oxidation Kinetics of Deforming active Surface
5. Noriyuki Hisamori (Sophia Univ.)
   Evaluation of corrosion and strength characteristics of living body environment application material
6. Kiyotaka Masaki (Okinawa National College of Technology)
   Study on Fatigue Property Improvement by New technology of Emerging peening and Mechanism of Fatigue　Crack Propagation with Synchrotron Radiation
7. Kenjiro Nakama (SUZUKI MOTOR CO.)
   A study on Numerical Calculation Methods for Knock in Spark Ignition Gasoline Engines
8. Mariko Nakamura (Osaka Univ.)
   Studies of Droplet Group Combustion and Numerical Model of Spray Flames
9. Kazuhiro Hayashida (Kitami Institute of Technology)
   Measurement of Fuel Concentration Destribusion in a Sooting Flame through Raman Scattering
10. Yasuyuki Yamamoto (National Institute of Advanced Industrial Science and Technology)
    Development of Soret Forced Rayleigh Scattring Method for Mass Diffusion Coefficient Measurement
11. Tatsuya Ishiyama (National Institute of Natural Sciences )
    Study on The Molecular Mechanism of Mass and Heat Transport at a Vapor-Liquid Interface
12. Takehisa Takaishi (Railway Technical Research Institute)
    Research on the Method of Evaluating Aeroacoustic Dipole Sound
13. Shintaro Takeuchi (Osaka Univ.)
    Study on Coherent Flow Structures in Free Space　and Interaction Problem with Non-Spherical Solid Object
14. Kenichi Funamoto (Tohoku Univ.)
    Blood Flow Simulation Integrated with Ultrasonic Doppler Measurement
15. Toshihiko Shiraishi (Yokohama National Univ.)
    Study on the Mechanism of MR Fluid Response and Its Application to Control Devices
16. Tadao Takigami (Railway Technical Research Institute)
    Study on Suppressing the Vertical Bending Vibration of Railway Vehicle Car bodies
17. Kazufumi Nishikawa (SANYO Electric Corporation)
    Study of talking Robot
18. Yuhei Yamaguchi (SANYO Electric Corporation)
    Development of force display systems and rehabilitation robot for upper limbs using actuators with functional fluids
19. Noritaka Kawasegi (Toyama Industrial Technology Center)
    A Study on Three-dimensional Nanofabrication Using a Combination of Nanoscale Machining and Chemical Etching
20. Masahiro Sasada (Kanagawa Univ.)
    Development of Fine Precision Shearin
21. Hiroaki Ito (Toshiba Corporation)
    Development of Elevator Non-contact Guide System
22. Atsushi Ohuchi (SANYO Electric Corporation)
    Development of Energy Saving and Fault Prediction Technologies using Operational Condition Adaptive Algorithm
23. Hiroki Ota (Hitachi Appliance, Inc.)
    Methods for Measuring and Identifying Exciting Force Generated by a Small Induction Motor
24. Emi Ohno (Ishikawajima-Harima Heavy Industries Co., ltd.)
    Co-firing of Wood Biomass in Pulverized Coal Fired Boilers
25. Yoshiharu Kanegae (Hitachi, Ltd.)
    Development of Method for Evaluating Stress and Strain Dependence of Electrical and Characteristics in Semiconductor Devices
26. Fumiko Kawashima (Mitsubishi Heavy Industries, Ltd.)
    Development of the remaining life prediction method for welding joints under creep condition
27. Takashi Kitahara (Hitachi Plant Technology,Ltd.)
    Alignment System of Bending Magnets for Cancer Atherapy
28. Yuichi Koide (Hitachi, Ltd.)
    Development of Evaluation Method to Determine Fragility of Equipment Based on Bayesian Approach
29. Hiroyuki Kono (Mitsubishi Heavy Industries, Ltd.)
    Dynamic Analysis and Evaluation of Running Performance for LRT Vehicle
30. Katsutoshi Kobayashi (Hitachi, Ltd.)
    Prediction of Pump Hydraulic Force by Numerical Simulation
31. Yujiro Tatsumi (Sumitomo Metal Industries, Ltd.)
    Development of Walking Control Technology in Hot Strip Finishin
32. Daisuke Tanaka (DMW Corporation)
    Development of Structural Monitoring System for Jet-Fun
33. Kazuhisa Nakagawa (the University of Tokyo)
    Fabrication of AFM tweezers of manipulation of nanometer size objects
34. Takeshi Nishi (Nippon Steel Engineering Co., Ltd.)
    Development of fuel gas injection technologies in direct melting for municipal solid waste
35. Yasuki Nishi (Shinmaywa Industries, Ltd.)
    Development of submersible pump having high pump efficiency and high passage performance
36. Akira Nebu (Hitachi, Ltd.)
    Development of strength Evaluation method of Piping Structure in Power Plants
37. Hiroki Fujiwara (NTN Corporation)
    Development of Design Technique for the Optimized Logarismic Pfofile of Bearing Rollers
38. Eiji Hoashi (Toshiba Co.)
    Development of multi-physics simulation technology for decomposition process of persistent organic compounds in super-critical water
39. Shinsuke Matsuno (Ishikawajima-Harima Heavy Industries Co., ltd.)
    Spray measurement on bi-propellant thrusters
40. Daisuke Muto (Hitachi, Ltd.)
    Development of prediction method for interior noise of high-speed train

1. Mecahnical Engineering Education Curriculum with the Lecture-Laboratory Integrated Classes
   Faculties, Department of Mechanical and Intelligent Systems Engineering, Tokyo Institute of Technology
2. Cross-Curricula Engineering Education Systems: An Effective Way to Fostering Creative Manufacturing Knowledge and Skills
   Sang-Jae Song, Hiroshi Kubota (Hiroshima Institute of Technology)
3. Publication of Practical Strength of materials and Its Application for Education
   Shinichi Nishida (Saga Univ.)
4. Holding a Contest to Spread and to Enlighten Stirling Engine as Teaching Material
   Stirling Techno-Rally Committee
5. Promotion of manufacturing education on life rescue in junior high schools
   Toru Yamamoto (Hiroshima Univ.)

1. Daihatsu Diesel Mfg. Co., Ltd.
   Sensor Type Oil Mist Detector MD-SX
2. TS Heatronics Co., Ltd.
   DLC-type Heatlane Heat Sink
3. Hitachi Giken Corp.
   Neoview Suzaku Review System for a fault in an Equipped PCBs
4. PHTORON Limited.
   Digital high speed video camera “FASTCAM-APX RS”
5. MITAKA KOHKI Co., Ltd.
   NON-CONTACT THREE-DIMENTISIONAL MEASUREING EQUIPMENT WITH A LASER BEAM PROBE.

1. Kohzo Komatsu (Institute Research & Development Co.,Ltd.)
   Development of Ventilation Model Experiment System for Road tunnel
2. Haruo Sakamoto (Kochi University of Technology)
   Resarch and Development of Brake Material and Brake Unit
3. Makoto Hayashi (Hitachi,Ltd.)
   Improvement of Reliability in Nuclear Power Plant Equipment

1. ELattice Strain Measurements of Hap Crystals in Bone Tissue Using X-Ray Diffraction Method
   Shigeru TADANO (Hokkaido University), Kazuhiro FUJISAKI (Hokkaido University) and Jun-ichi SHIBANO (University of Kitaimi Institute of Technology)
2. Numerical Simulation of Various Shape Changes of a Swollen Red Blood Cell by Decrease of Its Volume
   Shigeo WADA (Tohoku University), Ryo KOBAYASHI (Hiroshima University)
3. Analysis of Short Life Flaking due to Hydrogen Embrittlement (Influence of MicroSlip on Flaking due to Hydrogen Embrittlement)
   Nobuo KINO, Takeshi YAMAMOTO, Keizo OTANI and Noriko UCHIYAMA (Nissan Motor Co., Ltd.)
4. Contact and Adhesion Analysis Considering a Variation of Surface Stresses (2nd Report, A Comparison of the Present Theory and JKR Theory)
   Hideo KOGUCHI (Nagaoka University of Technology)
5. Microwave Imaging of Conductivity Distribution of Silicon Wafers
   Yang JU (Tohoku University), Masumi SAKA(Tohoku University),
   Hiroyuki Abe(Professor Emeritus Tohoku University)
6. Flow Characteristics of Gas-Liquid Two-Phase Flow in a Plate Heat Exchanger (Visualization and Void Fraction Measurement in a Single Channel)
   Hitoshi ASANO (Kobe University), Nobuyuki TAKENAKA, Terushige FUJII and Norio MAEDA (Kobe University)
7. Effects of Turbulence on Flame Structure and Nox Emission of Turbulent Jet Non-Premixed Flames in High-Temperature Air Combustion
   Hideaki KOBAYASHI (Tohoku University), Ken OONO(Tohoku University), Eun-Seong CHO (Seoul National University), Yasuo OGAMI (Tohoku University), Takashi NIIOKA(Tohoku University)
8. Response of Spanwise-Periodic Low-Speed Streaks to Turbulent Fluctuations
   Yasufumi KONISHI (Tokyo Metropolitan Institute of Technology), Masahito ASAI (Tokyo Metropolitan University), Yuki OIZUMI (NEC Aerospace Systems)
9. The Effects of Droplets on Mass Transfer in Wind-Driven Turbulence with Breaking Waves
   Ken-ichi SUGIOKA (Kyoto University), Satoru KOMORI (Kyoto University)
10. A Study on Fundamental Properties of PSP in Low Pressure Region
    Tomohide NIIMI (Nagoya University), Masaki YOSHIDA(AISIN AW CO,.LTD), Makoto KONDO(OMRON Corporation), Yusuke OSHIMA(Mitubishi Motors), Hideo MORI (Nagoya University), Yasuhiro EGAMI (DLR), Keisuke ASAI (Tohoku University), Hiroyuki NISIDE(Waseda University)
11. Vibration Suppression of Rotating Machinery Utilizing Discontinuous Spring Characteristics
    Yukio ISHIDA (Nagoya University), Jun LIU (Nagoya University)
12. Stretch Walking Pattern Generation for a Humanoid Robot
    Yu OGURA (Waseda University), Hun-ok LIM (Kanagawa University), Atsuo TAKANISHI (Waseda University)
13. Development of Feeding Support System and Its Quantitative Estimation
    Hiroshi KOBAYASHI (Science University of Tokyo), Taichi SHIIBA (Meiji University), Kentaro KONISHI (Uniden Corporation)
14. A Tenacious Solver Using Sliding Mode Control for Eigenvalue Problem of Rotor-Bearing Systems
    Hiroyuki FUJIWARA (National Defense Academy), Osami MATSUSHITA (National Defense Academy),
    Makoto ITO (National Defense Academy)
15. Measurement of Nanorheological Properties of Molecularly Thin Confined Lubricant Film Using Fiber Wobbling Method
    Shintaro ITO (Nagoya University), Kenji FUKUZAWA (Nagoya University), Hedong ZHANG (Nagoya University), Yasunaga MITUYA (Nagoya University)
16. Global Feature based IREC (Applied to Curved Shapes in Industrial Design)
    Hideyoshi YANAGISAWA (the University of Tokyo), Shuichi FUKUDA (Tokyo Metropolitan University)

Detail of JSME Medal for New Technology 2015

1. High Speed and High Gas Barrier Rotary DLC Plasma Coating System for PET Bottles
   Atsushi Ueda (Mitsubishi Heavy Industries Food & Packaging Machinery Co., LTD)
   Hideo Yamakoshi (Mitsubishi Heavy Industries, LTD)
   Seiji Goto (Mitsubishi Heavy Industries, LTD)
   Yuji Asahara (Mitsubishi Heavy Industries, LTD)
   Akira Shirakura (Kirin Brewery Co., LTD)
2. Development of 1010 m/min. ultra high-speed elevator with atmospheric pressure control, active mass damper etc.
   Masakatsu Okamoto (Toshiba Elevator and Building Systems Corporation)
   Hiroaki Mizuguchi (Toshiba Elevator and Building Systems Corporation)
   Toshiaki Nakagawa (Toshiba Elevator and Building Systems Corporation)
   Shigeo Nakagaki (Toshiba Corporation)
   Yoshiaki Fujita (Toshiba Corporation)
3. Long-term reliable creep test in excess of 100,000 hours and issue of Creep Data Sheet
   Kazuhiro Kimura, Kenji Yokokawa, Osamu Kanemaru, Toshio Ohba and Hideko Miyazaki
   (National Institute for Materials Science)
4. Development of High Performance Room Air Conditioner Using Two-Stage Compression Cycle with Gas Injection
   Atsushi Kubota (Hitachi, LTD.),
   Yasuo Notohara (Hitachi, LTD.),
   Atsushi Ohnuma (Hitachi Appliances, Inc.),
   Tetsuya Tadokoro (Hitachi Appliances, Inc.),
   Yoshinori Iizuka (Hitachi Appliances, Inc.)
5. Semi-active Suspension for Railway Vehicle
   Kimiaki SASAKI (Railway Technical Research Institute)
   Haruhiko KAWASAKI (KYB Corporation)
6. Development of an Induction-heated Rice Cooker Using Ultrasonic Waves
   Yoshiro Furuishi (Mitsubishi Electric Corporation)
   Takuya Suganami (Mitsubishi Electric Corporation in the past)
   Cyoji Nagamine (Mitsubishi Electric Corporation)
   Koji Hishiyama (Mitsubishi Electric Home Appliance Co., LTD)
   Akira Inokuma (Mitsubishi Electric Home Appliance Co., LTD)
7. Development of the refurbishment and reuse technology of gas turbine buckets
   Yomei Yoshioka (Toshiba Corporation)
   Daizo Saito (Toshiba Corporation)
   Toshiaki Fuse (Toshiba Corporation)
   Kazuhiro Kitayama (Toshiba Corporation)
   Junji Ishii (Toshiba Corporation)
8. Sophisticated Function-Integrated Mother Machine (Vertical CNC Cylindrical/Internal Grinding Machine for  Facilitating Process Innovation)
   Noboru Watanabe (Taiyo Koki, LTD)

1. Satoshi KITAYMA (Kanazawa UNIV.)
   Research and Development on the Algorithm for Global Optimization and its Applications
2. Kosaku KURATA (Kyushu Sangyo UNIV.)
   Studies on Mechanical Response and Remodeling Mechanism of Base Tissue
3. Takashi SUMIGAWA (Kyushu UNIV.)
   Research on Relationship between Localized Stress and Slip Behavior near Grain Boundary in High – Cycle Fatigue
4. Nobutomo NAKAMURA (Osaka UNIV.)
   Study on relationship between anisotropic elastic constants and functions in thin films
5. Takahiro HAYASHI (Nagoya Institute of Technology)
   Nondestructive evaluation fir large structures like a plate and a pipe using ultrasonic guided waves
6. Tetsuya MATSUDA (University of Tsukuba)
   Development of Time-Dependent Homogenization Theory and Its Application to Elasto Viscoplastic Analysis of Composite Materials
7. Tsuyoshi MAYAMA (Hokkaido UNIV.)
   Subsequent Viscoplastic Deformation after Cyclic Preloading
8. Hiroyuki ABE (Japan Aerospace Exploration Agency)
   Direct Numerical Simulation of a Turbulent Channel Flow at High Reynolds Numbers with or without Heat Transfer
9. Satoshi SOMEYA (The University of Tokyo)
   Measurement and control of fluid flow by the flow visualization
10. Shinji NAKAGAWA (Toyama Prefectural UNIV.)
    Development of visualization-based technique to measure heat and fluid flow and its application to electronic equipment
11. Hiroyuki YAMADA (National Traffic Safety and Environment laboratory)
    Chemical Mechanistic Analysis on HCCI Combustion
12. Yuka IGA (Tohoku UNIV.)
    Numerical Study of Cavitation Instabilities and the Suppression Using Reality-Oriented Analytical Model
13. Satoshi OGATA (Tokyo Metropolitan UNIV.)
    Drag Reduction of a Circular Cylinder and a Rotating Disk Flow in Surfactant Solution
14. Yukinori SAKIYAMA (The University of Tokyo)
    Multiscale Analysis of Nonequilibrium Rarefied Gas Flows
15. Takenobu Michioka (Central Research Institute of Electric Power Industry)
    Large-Eddy Simulation of a turbulent reacting flow
16. Kiyoshi Takagi (National Institute of Advanced Industrial Science and Technology)
    Control of Tower Crane
17. Yasutaka TSUJI (Kyushu UNIV.)
    Study on Evolutionary Design of Behavior for Mobile Robot using Multi-Objective Genetic Programming
18. Naoki HOSOYA (Saitama UNIV.)
    Experimental Modal Analysis with use of Rotational Degrees of Freedom
19. Hideyuki MORITA (Mitsubishi Heavy Industries, Ltd.)
    Investigation on Buckling Behavior of Cylindrical liquid Storage Tanks
20. Tomoko HIRAYAMA (Doshisha UNIV.)
    Study on Performances of Small-Sized Journal Bearings with MoS2 -Shot Coating
21. Hideyuki ARATA (The The University of Tokyo, Institute Curie)
    Angular velocity control of a single biomolecular motor by micro fabricated local heating device
22. Akihiko UMEDA (Mitsubishi Heavy Industries, Ltd.)
    Development of Micro-Traction Drive
23. Kosuke KISHI (Hitachi, Ltd.)
    Development of Dual-armed Master-slave 11-DOF Manipulator System with MR-compatibility
24. Mitsunori SAITO (Mitsubishi Electric Corporation)
    Development of Magnetic Bearing Wheel with Inclined Magnetic Poles and Low Disturbance Control Method
25. Keiichi SATO (Mitsubishi Heavy Industries, Ltd.)
    Development of steelmaking dust recycling process by use of organic wastes as heat source and reduction material
26. Taizo SATO (SANDENCO.)
    Development of the flow visualization technique for refrigerant flow and the prediction tool of an inlet pressure in a compressor for an automotive
27. Tadashi SATO (Hitachi, Ltd.)
    A winding mechanism for storage and discharger of various-sized bank notes
28. Takahiro SHIMADA (Ishikawajima-Harima Heavy Industries, Co., Ltd.)
    Development Study on Three Dimensional Seismic Isolation System with Hydraulic Rocking Suppression System
29. Kenzen TAKEUCHI (Quint Co.)
    Development of Nonparametric Shape Optimization Module Based on the Traction Method for Structural Optimization OPTISHAPE-TS
30. Shuichi TERAKADO (Hitachi, Ltd.)
    Development of Heat transfer Characteristics of Heat pipe with Bend
31. Atsushi TERAJI (NISSAN MOTOR CO., LTD.)
    Development of flame propagation model for Spark Ignition Engine
32. Shinsaku DOBASHI (Mitsubishi Heavy Industries, Ltd.)
    Development of the online monitoring device of the persistent organic pollutants by using laser spectroscopy
33. Norio NISHIJIMA (Hitachi, Ltd.)
    Application of high temperature bulk superconductors to magnetic separation system
34. Yasutaka NOGUCHI (SUMITOMO METAL INDUSTRIES, LTD.)
    Development of permanent magnet type eddy current retarder used creep-fatigue life prediction method
35. Akio HOSHI (Hitachi Construction Machinery Co., Ltd.)
    Hydraulic Excavators with Crawler Development of Dynamic Simulation Technology
36. Tomoki MASUKO (Tokyo Metropolitan Industrial Technology Research Institute)
    High Speed Welding Technique of Sheet Metal and Effect of Deformation on Fatigue Strength
37. Yasuhiko YOKOI (SANYO Electric Co., Ltd.)
    Development of Incubator with Automated Cell-Culture Sample Transfer System

1. Project to Investigate 3D-CAD Education in KOSEN（Tokyo　Metropolitan　College　of　Industrial　Technology）
   Production Education in TMCIT based on 3D-CAD
2. Yukio Ishida (Nagoya University), Yasumi Murata (Meijo University), Men’shov Igor (Nagoya University), Heig Edward (Nagoya University), Shoichi Hase (Hase International Patent Office)
   Teaching writing and presentation for scientifi English
3. OIZUMI Tetsuya (Sendai National College of Technology), KUMAGAI Kazushi (Sendai National College of Technology), HATTORI Masayuki (Sendai National College of Technology), OKA Yoshitsugu (Sendai National College of Technology), ENDO Yutei (Sendai National College of Technology)
   To Educate Creativity and Synthesis Skills, Innovation and Long Execution of Robot Development Program Simulated Product-development Projects at Business
4. Kazuhide KAMIYA（Toyama Prefectural University），Nagayuki KAMIYA，Takashi NOMURA（Toyama Prefectural University）
   Educational work through lectures and exhibitions by using wooden models made from Leonardo da Vinci’s codices
5. Yuji NAKASONE (Tokyo University of Scince），Shigeka YOSHIMOTO(Tokyo University of Scince），Takaaki SIZAWA（Tokyo University of Scince, Suwa）
   Establishment of Graduate- and Undergraduate-Level Educational Programs Using CAD/CAE for Solving Practical Engineering Problems
6. Masashi YAMANAKA (Tohoku University)
   Education for Creativity Development by Utilizing Digital Engineering
7. Takeshi YONEYAMA (Kanazawa University)，Yoshio MATSUI(Kanazawa University)，Shinobu TANAKA(Kanazawa University)，Yoshio IWATA(Kanazawa University)
   Creative design exercise on the importance of manufacturing experience

1. Sasakura Engineering Co., Ltd.
   Sasakura’s K Series Fresh Water Generators
2. Sintokogio, Ltd.
   Seiatsu Molding Machine ACE
3. TADANO LTD.
   The mobile crane with a work-area-controller
4. Harmonic Drive Systems, Inc.
   New Harmonic Drive® SHF series and SHG series
5. Makino Milling Machine Co., Ltd.
   MAG3 5-Axis Machining Center

1. Makoto KITANO (Hitachi,Ltd.)
   Development and Application of Strength Reliability Desigh Techenology of Electronic Components
2. Kosaburo NIWA (DAIDO METAL CO.LTD.)
   Development of New Plain Bearings & New Products in Tribalogy
3. Toshio YAMADA (TOYOTA MOTOR CO.)
   Research of Flow Analysis Methods in Engine

1. Anatomical and Functional Images of in vitro and in vivo Tissues by NIR Time-domain Diffuse Optical Tomography
   Zhao Huijuan (Tianjin University), Feng Gao (Tianjin University), Yukari Tanikawa (National Institute of Advanced Industrial Science and Technology), Kazuhiro Homma (National Institute of Advanced Industrial Science and Technology), Yoichi Onodera (RIKEN Brain Science Institute), Yukio Yamada (University of Electro-communications)
2. Development of Newly Designed Atomic Force Microscope System for Measuring of Mechanical Properties of Cells
   Kazuaki Nagayama (Nagoya Institute of Technology), Minoru Sasaki (Tohoku University), Takeo Matsumoto (Nagoya Institute of Technology.), Masaaki Sato (Tohoku University)
3. Surface Crack Growth Path and Fatigue Life Prediction due to Repeated Rolling / Sliding Contact
   Takahito GOSHIMA (Toyama University), Sotomi ISHIHARA (Toyama University), Masayosi SHIMIZU (Toyama University), Hirokazu YOSHIDA (Jamco Corporation), Yuji TSUCHIDA (Anden Corporation)
4. Subsurface Crack Initiation and Propagation Mechanism in the Super-Long Fatigue Regime for High Speed Tool Steel, JIS SKH51, by Fracture Surface Topographic Analysis
   Kazuaki SHIOZAWA (Toyama Univ.), Yuuichi MORII (Komatsu Ltd.), Seiichi NISHINO (Toyama Univ.)
5. Development of Fatigue Testing System for In-situ Observation by an Atomic Force Microscope and Small Fatigue Crack Growth Behavior in -Brass
   Atsushi SUGETA (OSAKA UNIV.), Yoshihiko UEMATSU (GIFU UNIV.), Keitarou TOMITA (ASAHI GLASS CO.), Kenji HIROSE (OLYMPUS MEDICAL SYSTEMS CO.), Masahiro JONO (FUKUI UNIV. OF TECHNOLOGY)
6. Thermal Radiation Spectroscopy Technique for Diagnosis of Temperature and Microstructure of Real Surfaces
   Toshiro MAKINO (Kyoto University), Hidenobu WAKABAYASHI (Kyoto University)
7. Low-Temperature Generation of High-Purity Single-Walled Carbon Nanotubes by Alcohol CCVD Technique
   Shigeo Maruyama (The University of Tokyo), Yuhei Miyauchi (The University of Tokyo), Shohei Chiashi (The University of Tokyo), Masamichi Kohno (Kyushu University)
8. One-Equation Subgrid-Scale Model with Dynamically Determined Energy Production Term
   Takeo KAJISHIMA (Department of Mechanical Engineering,Osaka University), Takayuki NOMACHI (Kochi Casio co.,Ltd.)
9. Bubble-Bubble Interaction Observed in a Swarm of Wall-Sliding Buddles (3rd Report : Effects of Rexnolds Number to Bubble-Bubble Interaction)
   Atsuhide KITAGAWA (Kyoto Institute of Technology), Kazuyasu SUGIYAMA (National Maritime Research Institute), Toshio SASAKI (University of Fukui), Yuichi MURAI (Hokkaido University)
10. Flows in T-Junction Piping System (1st Report: Flow Characteristics and Vortex Street Formed by Branch Pipe Flow)
    Hideki HIBARA (Ehime University), Toshiharu MURAMATSU (Japan Nuclear Cycle Development Institute), Naoki HIRATA (MITSUBISHI HEAVY INDSUTRIES, LTD )
    Kozo SUDO (Shibaura Institute of Technology)
11. Sound Decreasing Effects of Sound Absorbing Material Structures on the Vibrating Rigid Surface
    Mitsuru ENDO (Tokyo Institute of Technology), Tsutomu NISHIGAKI (Tokyo Institute of Technology Graduate student), Tatsunori KURAYA (Tokyo Institute of Technology)
12. Parallel Orientation of Pins by Vibration
    Yuichi SATO (Saitama University), Shuichi MIURA (Saitama University), Kazuaki TSUJIOKA (Toyota Communication Systems Co.)
13. Handling of an Object by Multiple Mobile Manipulators with Virtual 3-D Caster Dynamics in Cooperation with a Human
    Yasuhisa Hirata (Tohoku University PRESTO), Youhei Kume (Tohoku University Matsushita Electric Industrial Co.,Ltd.), Zhi-Dong Wang (Tohoku University), Kazuhiro Kosuge (Tohoku University)
14. Analysis of Friction-Induced Vibrations of Flying Head Slider in Near Contact Regime
    Masami Yamane (Tokyo Institute of Technology), Kyosuke Ono (Tokyo Institute of Technology), Hiroshi Yamaura (Tokyo Institute of Technology)
15. Generalized Approximation of van der Waals Force between Multilayers (Application to Analysis of Static Characteristics of a Magnetic Head Slider)
    Hiroshige Matsuoka (Tottori University), Shigehisa Fukui (Tottori University)
16. Proposal of Mirror Finishing Technology without Using a Polishing Pad (Development of 4-Body Finishing Technology Using Polymer Particles)
    Yishen LU (University of Tokyo), Yasuhiro TANI (University of Tokyo), Kenji KAWATA (FUJIMI INCORPORATED)

1. Development of large scale high speed printing machinery for newspaper
   Masakazu Akatsuka (Mitsubishi Heavy Industries,ltd.), Toshio Yoshikawa (Mitsubishi Heavy Industries, ltd.), Satoshi Matsushima (Mitsubishi Heavy Indsutries, ltd.), Koji Nishiyama (Mitsubishi Heavy Industries, ltd.), Shoichi Aoki (Mitsubishi Heavy Industries, ltd.)
2. Reverse parking assist system with automatic steering using rear view camera
   Hisashi Satonaka (TOYOTA MOTOR CORPORATION), Yoichi Iwata (TOYOTA MOTOR CORPORATION), Hideyuki Iwakiri (TOYOTA MOTOR CORPORATION), Katsuhiko Iwazaki (TOYOTA MOTOR CORPORATION), Tomohiko Endo (TOYOTA MOTOR CORPORATION)
3. Development of Accumulator-less High Efficiency CO2 Scroll Compressor for Heat pump water heater
   Kiyoshi Sawai (Matsushita Electric Industrial Co., Ltd.), Noboru Iida (Matsushita Electric Industrial Co., Ltd.) Takashi Morimoto (Matsushita Electric Industrial Co., Ltd.), Yoshiyuki Futagami (Matsushita Electric Industrial Co., Ltd.), Akira Hiwata (Matsushita Electric Industrial Co., Ltd.)
4. Ejector Cycle Refrigerator –2 stage Variable Expansion Nozzle and 50% COP improvement
   Hirotsugu Takeuchi (Denso Corporation), Hiroshi Yuhara (Denso Corporation), Haruyuki Nishijima (Denso Corporation), Toru Ikemoto (Denso Corporation), Makoto Ikegami (Denso Corporation)
5. Development of Low Caloric Gas Fired 300MW High Efficiency Cmbined Cycle Power Plant
   Ichiro Fukue (MITSUBISHI HEAVY INDUSTRIES, LTD.), Sunao Aoki (MISTUBISHI HEAVY INDUSTRIES, LTD.) Yoshiaki Tsukuda (MITSUBISHI HEAVY INDUSTRIES, LTD.), Akira Matsumoto (KIMITSU COOPERATIVE THERMAL POWER COMPANY, INC.) Akihito Kubota (KIMITSU COOPERATIVE THERMAL POWER COMPANY, INC.)
6. Development of turrets with built-in milling motors for NC lathes
   Masahiko Mori (MORI SEIKI CO., LTD), Kazuyuki Hiramoto (MORI SEIKI CO., LTD.), Mitsuji Matsumoto (MORI SEIKI CO., LTD.), Sigetsugu Sakai (MORI SEIKI CO,. LTD.), Haruki Ishiguro (MORI SEIKI CO., LTD.)
7. Development of simplified feed-water heating system for nuclear and steam powe plant using multi-stage steam injectors.
   Michitsugu Mori (Tokyo Electric Power Company), Tadashi Narabayashi (Toshiba Corporation), Shuichi Ohmori (Tokyo Electric Power Company), Chikako Iwaki (Toshiba Corporation), Yutaka Asanuma (Toshiba Corporation)
8. Development of Various-Sized Banknotes Handling Techndogies for the Worldwide Recycling ATM
   Kazushi Yoshida (Hitachi, Ltd.), Akira Nomiyama (Hitachi, Ltd.), Junichi Tamamoto (Hitachi, Ltd.), Shingo Noro (Hitachi, Ltd.), Riichi Kato (Hitachi-Omron Terminal Solutions, Co.)

1. Michihiko KOSEKI (Tokyo Institute of Technology)
   Patient-Specific Finite Element Modeling Based on the X-ray CT images Influenced by the Partial Volume Effect
2. Masanori Nakamura (Tohoku Univ.)
   Computational analysis of intra-left-ventricular hemodynamics for the advancement in clinical diagnosis of cardiac diseases.
3. Hideyoshi YANAGISAWA (Tokyo Metropolitan Institute of Technology)
   Development of Design Support Method to externalize diversifying Kansei Requirements
4. Yasutomo Uetsuji (Osaka Institute of Technology)
   Development of Multi-scale Finite Element Method for New Piezoelectric Materials Based on A Crystallographic Homogenization Method
5. Yoshitaka Umeno (Graduate school of engineering, Kyoto univ.)
   Ab initio molecular dynamics study of mechanical0 properties of microscopic materials
6. Hidehiko Kimura (Nagoya University)
   Micro and Nano-Analysis on Effect of Microstructure of Fatigue Mechanism in Metallic Materials
7. Tadahiro Shibutani (Yokohama National Univ.)
   Fracture Mechanisms in Multi-layered Sub-micron Films as Small Structures
8. Hironori TOHMYOH (TOHOKU UNIVERSITY)
   A Study of Dry-Contact Ultrasonic Transmission for High-Resolution Nondestructive Evaluation of Defects in IC Packages
9. Nobuyuki Kawahara (Okayama University)
   Research on Steady Spray Flame and Gas Temperature Measurement Using Laser Diagnostics
10. Kazunori Shimazaki (JAPAN AEROSPACE EXPLORATION AGENCY )
    Thermal radiation control by optimum designing of optical thin films and metal-insulator transition materials
11. Tomohiro NOZAKI (Tokyo Institute of Technology)
    A study of fundamental processes in atmospheric pressure non-equilibrium plasmas and application to advanced materials processing
12. Kaoru Iwamoto (The University of Tokyo)
    Drag Reduction Control in High Reynolds Number Wall Turbulence
13. Masaya Shigeta (Tokyo Institute of Technology)
    Numerical Study of Micro / Nano Particle Synthesis Using Functionally Enhanced Plasma Flows
14. Takashi NISHIHARA (CENTRAL RESEARCH INSTITUTE OF ELECTRIC POWER INDUSTRY)
    Clarification of fluid excitation force and wake behavior of cylindrical structures
15. Yasutaka YAMAGUCHI (DEPARTMENT OF MECHANOPHYSICS ENGINEERING GRADUATE SCHOOL OF ENGINEERING OSAKA UNIVERSITY)
    Molecular Dynamics Study on High-Energy Reactive Cluster Impact Leadin g to Surface Erosion on Diamond
16. Qingjiu HUANG (Tokyo Institute of Technology)
    Position, Froce, Posture and and Vibration Control for Irregular Terrain Walking of Multi-Legged Walking Robot
17. Susumu HARA (Toyota Technological Institute)
    Study on Proposal of Nonstationary Optimal Control Method and Its Applications to Positioning of Flexible Structures and Power-Assist Systems
18. Soichi Ibaraki (Kyoto University)
    Disturbance Estimation on a Hexapod-type Parallel Kinematic Machine Tool by Using a Disturbance Observer
19. Masahari Komori (Kyoto University)
    Simultaneously optimum design method of helical gears in terms of vibration and load carrying capacity
20. ZHANG Hedong (Nagoya University)
    Measurements of Spreading of Molecularly Thin Lubricant Films on Magnetic Disk Surfaces
21. Kunio Asaai (Material Research Laboratory Hitachi, Ltd.)
    Development of a new strength design method based on small and defects of blades and rotors of steam turbine.
22. Takenori Atsumi (Hitachi,Ltd.)
    Development of the Sampled-data Control Technology for Shaping the Mechanical Resonance of the Actuator in Hard Disk Drives
23. Takeshi IRITANI (KUBOTA Corporation Sakai Plant Farm & Industrial Machinery R & D Dept.�U)
    Development of the Dynamic Behavior Analysis Technology in Engine Valve Train
24. Takeshi KASHIYAMA (SUZUKI MOTOR CORPORATION)
    Development of Electrodeposition Painting Simulation System for Car Body
25. Hiroo Sakamoto (Mitsubishi Electric Corporation)
    Development on practical application technology of strnctural optimization for electronic devices.
26. Tomonori SASAKI (Tokyo Metropolitan Industrial Technology Research Institute)
    Improvement of the mechanical properties of metal thin films using very low energy Argon ion irradiation and the development of its evalvation method.
27. Masashi Sasaki (Mitsubishi Heavy Industries, Ltd.)
    Analysis of Web Runnability In-roll Stress Considerring Effect of Air-entrainment
28. Kazuyuki SUGIMURA (Hitachi Ltd.)
    Development of Intelligent Design Optimization System for Turbomachinery
29. Yasuaki Sonoda (SANYO Electric Co.,Ltd.)
    Development of the Vibration Control System for a Drum Type Washer / Dryer
30. Makoto Tanaka (Hitachi Plant Engineering & Constraction Co, Ltd.)
    Development of High Precision Control System for Temperature in a Thermal Chambe
31. Yoichi Tanaka (Toho Gas Co.,Ltd.)
    Development of the waste powe generation simulation tool
32. Yoshihiro Dozono (Mechanical Engineering Research Laboratory,Hitachi Ltd.)
    Development of Shaking-Table Control Technique for Collapse Testing
33. Tatsuyuki Nakagawa (SANYO Electoric Co., Ltd)
    Development of Smart Prototyping—A Remote Modeling System
34. Kouji Nishizawa (Mechanical Engineering Research Laboratory, Hitachi Ltd.)
    Development of Microscopic Manipulator System for Surgical Support to Clinical Applications for Department of Neurosurgery
35. Akira Noma (Mitsubishi Heavy Industries, LTD.)
    Development of a Slag Pyrometer with Two-wavelength Far Infrared to Measure the Temperature of the Molten Slag Surface through High Density of Soot Condition
36. Manabu Yamada (Hitachi Plant Engineering & Construction Co., Ltd.)
    Development of a Power-Assisted Lifting Device

1. Ryozo ISHIWATA (KANAGAWA INSTITUTE OF TECHNOLOGY), Mitsumasa NEMOTO (KANAGAWA INSTITUTE OF TECHNOLOGY)
   Educational Work through the Pablication of “Magic of Flow“and the Execution of an Ideal Competition
2. Kaneichirou Imai (Honorary Member)
   Contribution to Globalization of Japanese Mechanical Engineering Education
3. Masao FUJII (KINKI UNIVERSITY), Nobuhiro KATO (KINKI UNIVERSITY), Kazuhiro UEDA (MITSUBISHI ELECTRIC ENGINEERING CO.,LTD), Takaki SHIMIZU (MITSUBISHI ELECTRIC ENGINEERING CO.,LTD).
   Industry-University Cooperation in Mechanical Design Education by 3D CAD
4. Kikuo Fujita (Osaka University), Takeo Kasjihisma (Osaka University), Takahide Sakagami (Osaka University), Toshiyuki Ohtsuka (Osaka University)
   Development of Projrct-Based Design Subject for Learning Problem Setting and solving
5. Ko Minakami (Toshiba Corporation)
   Services to School Education through Corporate Environmental Communication

1. Shogo KATO (ASANO GEAR Co., Ltd)
   Development of the measurement method of the tooth profiles and the quality improvement technology of hypoidgears
2. Shigeo SAKURAI (Hitachi, Ltd.)
   The Development of Life Assessment Technology based on High Temperature Damage Mechanism for Life Extension of Power Systems
3. Daisaku SAWADA (TOYOTA MOTOR CORPORATION)
   Development of Direct Injection SI Engine

1. Mechanical Evaluation of Reconstructing Structures after Total Sacrectomy and their Improvement
   Juhachi ODA(Kanazawa University), Jiro SAKAMOTO(Kanazawa University), Yuji NAGASHIMA(Toray Industries, Inc.), Hideki MURAKAMI(Kanazawa University), Akira YOSHIDA(Wajima City Hospital), Norio KAWAHARA(Kanazawa University), Katsuro TOMITA(Kanazawa University)
2. Development of a New Diagnosis Method for Incipient Caries in Human Teeth Based on Thermal Images Under Pulse Heating
   Takahide SAKAGAMI(Osaka University), Shiro KUBO(Osaka University), Takeshi NAGANUMA(Lion Corporation), Tomoyasu INOUE(Osaka University), Kazumasa MATSUYAMA(Lion Corporation)
   Shoji NAKASHIMA(Lion Corporation), Kenji KANEKO(The Lion Foundation for Dental Health)
3. Microscopic Symmetric Bifurcation Analysis for Cellular Solids Based on a Homogenization Theory of Finite Deformation (1st Report, Theory)
   Nobutada OHNO(Nagoya University), Dai OKUMURA(Nagoya University), Hirohisa NOGUCHI(Keio University)
4. A Method for Introducing Pre-Crack along Interface between Submicron-Thick Film and Substrate
   Tkayuki KITAMURA(Kyoto Univ.), Hiroyuki HIRAKATA(Kyoto Univ.), Takato KUSANO(Hitachi Home & Life Solutions, Inc)
5. Evaluation of Corrosion Fatigue Crack Propagation Behavior at Low Pressure Steam Turbine Grooves
   Akira MORITA(The Kansai Electric Power Co.,Inc), Hiroyuki KAGAWA(The Kansai Electric Power Co.,Inc), Shiro KUBO(Osaka University)
6. 2-D Imaging of Soot Formation Process in a Transient Spray Flame by Laser-induced Fluorescence and Incandescence Techniques
   Tetsuya Aizawa(Tokyo Institute of Technology), Hidenori Kosaka(Tokyo Institute of Technology), Yukio Matsui(Tokyo Institute of Technology)
7. Flow Measurements in Microspace Using Sub-Micron Fluorescent Particles (Proposal of Spatial Averaged Time-Resolved PTV Considering Brownian Motion of Tracer Particles)
   Seijiro INABA(Sony Corporation), Yohei SATO(Keio University), Koichi HISHIDA(Keio University), Masanobu MAEDA(Keio University)
8. Visualization of Boiling Structures in High Heat-Flux Pool-Boiling
   Shigefumi NISHIO(University of Tokyo), Hiroaki TANAKA(Sanyo Electric Air Conditioning Co., Ltd.)
9. A Mixed-Time-Scale SGS Model for Practical LES
   Masahide Inagaki(Toyota Central R&D Labs., Inc.), Tsuguo Kondoh(Toyota Central R&D Labs., Inc.), Yasutaka Nagano(Nagoya Institute of Technology)
10. Non-Contact Micro-Liquid Mixing Method Using Ultrasound
    Hajime KATOU(Hitachi, Ltd.), Ryo MIYAKE(Hitachi, Ltd.), Takao TERAYAMA(iTiD Consulting, Ltd.)
11. Reduction of Aerodynamic Noise by Controlling the Spanwise Wavelength of Vortex Structure in a Cavity
    Yuzuru YOKOKAWA(Japan Aerospace Exploration Agency), Yu FUKUNISHI(Tohoku University)
12. Investigation of the Impedance Characteristics of Human Arm for Development of Robots to Cooperate with Humans
    Md. Mozasser RAHMAN(Bangladesh Institute of Technology), Ryojun IKEURA(Mie University), Kazuki MIZUTANI(Mie University)
13. Self-powered active control for ship anti-rolling system (Experiments with scale model)
    Yoshihiro Suda(The University of Tokyo), Ryuzo Hayashi(The University of Tokyo), Yuji Koike (Ishikawajima-Harima Heavy Industries Co., Ltd), Shigeyuki NAKADAI(Chiba Institute of Technology)
14. Vibration Isolation System Using Zero-Power Magnetic Suspension (1st report: Principles and Basic Experiments)
    Takeshi Mizuno(Saitama University), Ryoichi Yoshitomi(Honda R&D Co.,Ltd.)
15. Manufacture of Overhanging Sharp Corner by Means of 6-Axis Control Machining with the Application of Ultrasonic Vibrations
    Feliciano H.JAPITANA(The University of Electro-Communications), Koichi MORISHIGE(The University of Electro-Communications), Shugo YASUDA(The University of Electro-Communications)Yoshimi TSAKEUCHI(Osaka University)
16. Effects of Accommodation Coefficient on the Stresses at the Surface of Slider Gas Bearings with Nano-Meter Spacings (An Analysis Method for Shear Stress and Comparisons with the DSMC Results)
    Kiyomi YAMANE(Tottori University), Shigehisa FUKUI(Tottori University)

1. Shuichiro FUKUSHIMA(Osaka University)
   Determination of subcellular distribution of shear stress at the surface of endothelial cells
2. Hisatake ITOGA(Nakanihon Automotive College)
   Study on subsurface fracture of high strength steel in gigacycle fatigue
3. Shigenobu OGATA (Osaka Univ.)
   First Principle Study on Ideal Shear Strength
4. Kenji Hirohata(Toshiba Corporation)
   Structual Reliability Design for High Density Packaging of Electronic Devices
5. Hiroyuki Waki(Osaka Univ.)
   Research on Mechanical Properties of Plasma-Sprayed Coatings and High Temperature Fatigue Strength of Thermal Barrier Coated Stainless Steel
6. Masaki Ueno(Honda R&D Co., Ltd.)
   A Study of Exhaust Emission Decrease Technology for Gasoline Engines
7. Ryo OHMURA(Institute for Energy Utilization, AIST)
   Thermal-Engineering Study on Clathrate Hydrates
8. Tatsuya Kwaguchi (Keio Univ.)
   Development of three dimensional temperature measurement technique in fluid flow
9. Shoji Mori (Yokohama National University)
   Study on Burnout Occurrence Mechanism near the Flow Obstacle in Boiling Two-Phase Upward Flow within a Vertical Annular Channel
10. Hitoshi Ishikawa (Tokyo University of Science)
    Vortex Ring – Vortex Tube Interections
11. Satoshi Kikuchi(Tohoku University)
    The Research about Control of Bypass Transition in the Case of Textile Surface
12. Akiko FUJIWARA (The University of Tokyo)
    Bubble Motion in the Linear Shear Flow
13. Sanehiro WADA (Tokyo Institute of Technology)
    Multilines flow rate measurement using ultrasonic Doppler method
14. Hidetsugu ISHIMARU (Hitachi Zosen Corporation)
    Study on Dynamic Characteristics of Non-contacting Seals and Their Effect on the Rotor Stability
15. Toru Okada (Kobe Steel Ltd.)
    Study on passive damper for coupled flutter of super-long-span suspension bridge
16. Masayuki KAMON (Kawasaki Heavy Industries, Ltd.)
    Reseach on the Motion Analysis and the Motion Control of Three-Dimensional Free-Flying Dynamic Systems
17. Kenji NAGASE (NAGOYA Univ.)
    Wave Control of Damped Mass-Spring Systems
18. Mitsuo HIRATA (Chiba University)
    Reseach on the Application of Sampled-data H�� Control Theory to Mechatronic Systems
19. Kohei IIDA (Railway Technical Research Institute)
    Study on Dynamic Contact Characteristics and Design Conditions of Contact/Near-contact Sliders for Hard Disk Drives
20. Hiroshige MATSUOKA (Tottori University)
    Reseach on Dynamics of Information Microsystems Considering Surface Forces
21. Kazuo UZUKA (TOK BEARING CO., LTD.)
    Development of Nutation Motors
22. Takehiko EGUCHI (HITACHI, Ltd.)
    Non-linear Simulation Method of Rotating System with autmatic Balancer
23. Michito ENOMOTO (Panwashlet Co., LTD)
    The Development of Super-small Electromotion Opening and Closing Device of Toilet Seat and Lid
24. Yasuaki Ohtaki (Tohoku University)
    A New Technique of Nonrestrictive Monitoring and Assessment of Physical Activity
25. Masaru OHTAHARA (HITACHI Air Conditioning Systems Co., Ltd.)
    Development of High Efficiency Scroll Compressors for R410A Application
26. Naomichi OMORI (Ishikawajima-Harima Heavy Industries Co., Ltd.)
    Development of Air-supported Conveyors with Wide belt
27. Kazuhide ONO (Nikkiso Co., Ltd.)
    Development of Blood Leak Detector in Plasmapheresis Machine
28. Tomonaga OYAMADA (HITACHI Ltd.)
    Development of Sensing and Testing Methods for Reliability Evaluation of Lubriation Parts in Refrigeration Compressors
29. Kazuya KATADA (Hitachi Industries Co., Ltd.)
    Development of Peeling Machine which Stick Tape
30. Yoshiyuki KANEKO (Takamatsu Machinery Co., LTD.)
    Development of a High Precision Lathe with Countermeasure of Environmental Preservation for Thermal Deformation
31. Hidenori KOMATSUBARA (Yamagata University)
    Development of Concave Conical Gear Used for Marine Transmissions
32. Kenji TAGUCHI (SANYO Eletric Co., Ltd.)
    Development of the �ghist�h Postural Change long-term care bed
33. Kengo TANAKA (MITSUBISHI HEAVY INDUSTRIES, LTD.)
    Development of the High Efficiency Miller Cycle Gas Engine
34. Masao TANIZAWA (Fuji Research Institute Co.)
    Development of Operational Planning System for Co-generation system with Ice Storage
35. Hiroyuki HASHIZUMI (SANKYO ALUMINUM INDUSTRY CO., LTD)
    Flexible Biomimetic Handling System for Bending Process of Aluminum Shape
36. Kosuke MATSUMOTO (Tokyo Metoro co., LTD.)
    Reseach on the Method of Friction Control between wheal and rail
37. Jun MIURA (Hitachi Industries Co., Ltd.)
    Development of High Reliability Laminator for the Resist Film
38. Tetsuro MIYAMOTO (HITACHI, Ltd.)
    Development of Sorting System for Nonmagnetic Metal in Metallic Waste
39. Kazuyuki YAMAGUHI (HITACHI, Ltd.)
    Development of Vibration Estimation Technology for Gas Turbine Compressors
40. Hiroshi YOSHIMURA (Daido Metal Co., Ltd.)
    Development of Eco-Friendly Oil on Water Drop Metalworking Fluid Supply System

1. A Heavy Duty Diesel Engine Developed for Extremely Low Emissions
   Makoto Endo(Hino Motors, Ltd.), Makoto Tuji(Hino Motors, Ltd.), Toshikatsu Muranatsu(Hino Motors, Ltd.), Hisaki Tourisaka(Hino Motors, Ltd.), Mitsuru Hosotani(Hino Motors, Ltd.)
2. Development of the fuel cell vehicle adapting hybrid technology
   Hidemi Ohnaka(Toyota Motor Corporation), Toshio Uchida(Toyota Motor Corporation), Horio Kimihide(Toyota Motor Corporation), Mikio Kizaki(Toyota Motor Corporation), Tetsuhiro Ishikawa(Toyota Motor Corporation)
3. Development of Ejector Refrigeration Cycle Technology for CO2 Heat Pump Water Heater
   Susumu Kawamura(DENSO CORPORATION), Takeshi Sakai(DENSO CORPORATION), Yoshitaka Akiyama(DENSO CORPORATION), Ken Yamamoto(DENSO CORPORATION), Hirotsugu Takeuchi(DENSO CORPORATION)
4. Research on Manufacturing Technology for Multi-Layer Diffractive Optical Element and Applications in Camera Lenses
   Masamichi Saito (Canon Inc.), Masaaki Nakabayashi(Canon Inc.), Toru Imanari(Canon Inc.),　Yuichi Miyoshi(Canon Inc.), Akihiko Yokoyama(Canon Inc.)
5. Side Exhaust Port System Rotary Engine Development
   Seiji Tashima(Mazda Motor Corp.), Suguru　Fuse(Mazda Motor Corp.), Ritsuharu Shimizu(Mazda Motor Corp.), Shinji Kanbara(Mazda Motor Corp.), Shinya Ueki(Mazda Motor Corp.)
6. Diesel Particulate – NOx Reduction System: DPNR
   Toshiaki Tanaka(Toyota Motor Corp.), Toshio Fujimura(Toyota Motor Corp.), Souichi Matsushita(Toyota Motor Corp.), Akira Shoji(Toyota Motor Corp.), Seiji Okawara(Toyota Motor Corp.)
7. Motor manufacturing technology using a spiral type core
   Akira Hashimoto(Mitsubishi Electric Corp.), Nobuaki Miyake(Mitsubishi Electric Corp.), Yuji Nakahara(Mitsubishi Electric Corp.), Yasuyuki Nakanishi(Mitsubishi Electric Corp.), Hideto Nishimura,(Mitsubishi Electric Corp.)
8. Magnetic Printing Technology
   Kaoru Matsuoka(Matsushita Electric Industrial Co. Ltd.), Kiyokazu Tohma(Matsushita Electric Industrial Co. Ltd.), Hideyuki Hashi(Matsushita Electric Industrial Co. Ltd.), Taizou Hamada(Matsushita Electric Industrial Co. Ltd.), Tatsuaki Ishida(Matsushita Electric Industrial Co. Ltd.)

1. Kazushige Kimura (Japan Fine Ceramics Center)
   The development of life assessment technology for high temperature steam turbine components and it’s contribution to the maintenance of thermal power plants
2. Toshiaki Konomi (Kyushu Universty)Contribution on measurement and analysis for an automotive engine
3. Masahiro Seki (Japan Atomic Energy Reseach Institute)
   Development of Ultra-High Heat Flux Components for ITER
4. Kyozaburo Furumura (NSK Ltd.)
   The Development of Technologies for Long Life Rolling Bearings

1. Smooth Muscle Cells Freshly Isolated from Rat Thoracic Aortas are Much Stiffer than Cultured Bovine Celles: Possible Effect of Phenotype
   Takeo Matsumoto (Nagoya Institute of Technology), Junpei Sato (Asahi Kasei Corporation), Mitsunobu Yamamoto (Hitachi High-Technologies Corp.), Masaki Sato (Tohoku University)
2. The Effect of Creating a Moderate Stenosis on the Localization of Intimal Thickening in the Common Carotid Artery of the Rabbit Fed on a Cholesterol-Rich Diet
   Shigeo Wada (Tohoku University), Makoto Koujiya (Nikkiso Co. LTD), Takeshi Karino (Hokkaido Universty)
3. Clarificaton of Damage Extention Mechanism on 2.25 Cr-1Mo Steel under Creep-Fatigue Loading Conditon
   Takashi Ogata (Central Research Institute of Electric Power Industry)
4. S-N Property and Fractography of High Carbon Chromium Bearing Steel over Ultra Wide Life Region under Rotating Bending
   Tatsuo Sasaki(Ritsumeikan University), Mitsuhiro Takeda (Toray Industries Inc.) Nobuyuki Tanaka (NSK Ltd.), Manabu Kanemitsu (Kanazawa Technical College), Noriyasu Oguma (Koyo Seiko Co., Ltd.), Kazuaki Shiozawa (Toyama University)
5. Prediction of Iguition Process in Diesel Sprays by Stochastic Model
   Makoto Ikegami (Fukui University of Technology), Koichiro Nakatani (Toyota Motor Corporation), Masahiro Shioji (Kyoto Universtity)
6. CFD Simulation for stratified Combustion Process in a Direct Injection Gasoline Engine
   Hiroshi Miyazawa (Toyota Central R&D Labs., Inc.), Yoshihiro Nomura (Toyota Central R&D Labs., Inc.), Makoto Koike (Toyota Central R&D Labs., Inc.), Terutoshi Tomoda, Toyota Motor Co.
7. Modiied Theroretical Models of Film Condensation in Harizontal Microfirm Tubes
   Huasheng Wang (University of London), Hiroshi Honda (Kyushu University), Shigeru Nozu (Okayama Prefectural University)
8. Anomalous Flow Phenomena Due to Breakdown of Tip Leakage Vortex in an Axial Compressor Rotor at Ner-Stall Condition
   Masato Furukawa (Kyushu University), Kazuhisa Saiki (National Aerospace Laboratory of Japan), Kazuhiro Yamada (Iwate University), Masahiro Inoue, (Kyushu University)
9. Development of Cavitation Erosion on a Contoured Plig in High Pressure Control Valves
   Satoshi Yuzawa (Waseda University), Ryoji Okutsu (Yamatake Corporation), Takumi Hashizume (Waseda University), Eisuke Outa (Waseda University)
10. A Study on Thermo-Hydraulic Instability of Boiling Natural Circulation Loop with a Chimney (4th Report, An Analytical Consideration of the Stability and Thermo-Hydraulic Characeristics in the Chimney in High Pressure)
    Fumio Inada, (Central Reseach Institutese of Electric Power Industry), Masahiro Furuya (Central Reseach Institutese of Electric Power Industry), Akira Yasuo (Central Reseach Institutese of Electric Power Industry)
11. A Numericial Simulation for Carrier Particle Behavior in Electrophotographic Magnetic Brush Development
    NaTsuki Kuribayashi (Hitachi Printing Solutions, Ltd.), Teruaki Mitsuya (Hitachi Printing Solutions, Ltd.), Nobuyuki Hoshi (Hitachi Koki, Co.,Ltd.)
12. A Unified Approach to Multibody Dynamics Formulation (Variable-Gain Penalty Algorithm)
    Takashi Nagata (The Institute of PHsical and Chemical Reseach)
13. Measuerement of Three Dimensional Ball Motion in Angular Contact Ball Bearing (Measurement with Hall Elements Arranged on Fixed Oblique Cordinates)
    Akira Nakajima (Saga University), Chenyang Zhang (Youth Engineering Co.,Ltd.) Toshifumi Mawatari (Saga University), Takafumi Yoshida (Mitsubishi Heavy Industries, Ltd.), Yasuyoshi Tozaki (Mitsubishi Heavy Industries, Ltd.), Susumu Matsumoto (Mitsubishi Heavy Industries, Ltd.)
14. Theoretical Analysis of Stick Motion Generated at the QuadrantChanging Position in NC Machine Tools and Its Compensataion by an Input Adaptive System
    Kazuo Nagashima, Msahide Katsuki (Toshiba Machine Co.,Ltd.) Kuniharu Kawakami

1. Katsuko Furukawa (University of Tokyo)
   Real-time Observation device of Platelet adhension to opaque material surface under shear flow condisions
2. Yoshinobu Shimamura (Tokyo Institute of Technology)
   Development of Damage Growth Simulation Technique for Composite Laminates
3. Kazuto Tanaka (Kyoto University)
   Effects of Enviroments on Impact and Fatigue Fracture Behavior of Fiber Reinforced Plastics
4. Motoharu Fujigaki (Wakayama University)
   Improvement of Speed and Accuracy of Non-contacting Shape and Deformation Measurment by Optical Method
5. Kisaragi Yashiro (Kobe University)
   Molecular Dynamics Study on Local Lattice Instability at a Dislocation Nucleation and Motion
6. Hiroyuki Kumano (Tokyo Institute of Technology)
   Study on Diet Contact Melting of Porous Material
7. Takuya Shiraishi (Hitachi, Ltd.)
   A Study of Mixture Formation in a Direct Injection S.I. Engine
8. Takeshi Seta (Toyama University)
   Stability Analysis of Thermal Lattice Boltzmann Models
9. Yoshihiro Taguchi (Keio University)
   Thermal Diffusivity Measurement of High-Conductivity Thin Film by Means of Dynamic Grating Radiometry
10. Keiko Anami (Kyoto University)
    A Study of Flow-Induced Coupled-Mode Self-Excited-Vibration of Full-Scale Tainter-gates
11. Souichi Saeki (Yamaguchi University)
    Self-Induced Sloshing Excited by Horizontal Plane Jet
12. Shinji Tsujimura (KOMATSU)
    A Study of the effects of mean shear and horizontal temperature grandient on rotating stratified turbulence
13. Yosuke Matsukuma (Kyushu University)
    Numerical Simulation of Complex Flow through micro-channel by lattice gas automata method
14. Toshiki Komatsuzaki (Kanazawa University)
    Study on Adaptive Active Noise Control using Neural Network
15. Takumi Sasaki (The University of Kitakyushu)
    Vibration Analysis and Stability Analysis for Large-Scale Nonlinear Systems
16. Arata Masuda (Kyoto Institute of Technology)
    A Study on Mechanical and Structural Health Monitornin
17. Katsutoshi Yoshida (Utsunomiya University)
    A Study on Chaotic Behavior in Nonlinear Vibration Systems with Stochastic Excitations
18. Kenjiro Takemura (Tokyo Institute of Technology)
    Reseach on Multi-DOF Ultrasonic Motor
19. Yoshitaka Nakanishi (Oita University)
    Contorl of water Characteristic in Artificial Joint
20. Keiichi Nakamoto (Osaka University)
    Development of Real-Time Tool Path Generation Method to Realize NC Programless Machining
21. Kosuke Ashihara (Ebara Reseach Co., LTD.)
    Development of the Fluid Dynamical Design Optimization of Turbomachinaery 3-D blades
22. Tsutom Ando (Tohoku University)
    Development of an Induction Type MHD Pump Generating Linear and Rotary Motions for High-temperature Molten Metals.
23. Nobuhiro Isobe(Hitachi, Ltd.)
    Development of Life Assessment Technologies Based on Micro-crack Growth Models for High Temperature Components
24. Masayuki Kurita (Hitachi, Ltd.)
    Flying-height Adjustment of a Magnetic Head Slider with a Piezoelectric Micro-Actuator
25. Kazunori Shimizu (Sankyo Aluminium Industry Co., Ltd.)
    End Milling of Extruded Alminium Alloys Using Articulated Robot
26. Eiichirou Tanaka (Hitachi, Ltd.)
    Development of the Numericial Analysis-Method to Predict Vibration and Noise from a Multi-Stage Gear-Drive System

1. Development of the Stick Coil with an integrated Igniter – Cylindrical Ignition Coil installed into Engine Plug Hole –
   Kazutoyo Osuka(DENSO CORPORATION), Masahiro Sato(DENSO CORPORATION), Masahiro　Yamamoto(DENSO CORPORATION), Keisuke Kawano(DENSO CORPORATION), Takashi Tabata(DENSO CORPORATION)
2. Development of lead-free plain bearing for heavy-duty engines
   Yoshio Kumada(TAIHO KOGYO CO.,LTD), Souji Kamiya(TAIHO KOGYO CO.,LTD), Katsuyuki Hashizume(TAIHO KOGYO CO.,LTD), Takashi Tomikawa(TAIHO KOGYO CO.,LTD), Hiroshi Kanayama(TAIHO KOGYO CO.,LTD)
3. A newly developed of vertical-axis integrated washer-dryer with high detergency and a compact body
   Toshihumi Koike(Mechanical Engineering Research Laboratory of Hitachi Ltd.),Yoshihiro Ohta(Mechanical Engineering Research Laboratory of Hitachi Ltd.), Keizou Kawamura(Mechanical Engineering Research Laboratory of Hitachi Ltd.), Hiroshi Oosugi(Hitachi Home & Life Solution Ltd.), Toshiyasu Kamano(Hitachi Home & Life Solution Ltd.)
4. Development of high performance screw compressor driven by direct couple high-speed motor
   Shigeto Kotani(Kobe Steel, Ltd.), Shuzo Mohri(Kobe Steel, Ltd.), Masaki Matsukuma(Kobe Steel, Ltd.), Hajime Nakamura(Kobe Steel, Ltd.), Kai Nakanishi(Kobe Steel, Ltd.)
5. Development and Practical Application of Contactless Smart Card Ticketing System
   K. Suzuki(JR East Mechatronics Co.,Ltd.), A. Shiibashi(East Japan Railway Company), S. Katagata(East Japan Railway Company), H. Nagase(JR East Mechatronics Co.,Ltd.), K. Hasegawa(JR East Mechatronics Co.,Ltd.)
6. Accurate compensation system for thermal deformation of machine tools
   Harumitsu Senda(OKUMA Corporation) , Reiji Satou(OKUMA Corporation)
7. Development of High-Strength Plastic used in Functional Integration Modules
   Takahiro Tochioka(Mazda Motor Corp.), Chikashi Kawamoto(Mazda Motor Corp.), (Mazda Motor Corp.), Masanori Ogawa(Mazda Motor Corp.), Kenichiro Sugimoto(Mazda Motor Corp.)
8. High temperature gasifying and direct melting technology of solid waste
   T.Matsudaira(JFE Engineering Corporation), S. Nakamura(JFE Engineering Corporation)　Y. Suzuki(JFE Engineering Corporation)

1. Makoto Asai (Toyota Motor Corporation)
   The Contridution to the Improvement of Noise & Vibration　Quality of Japanese Vehicles
2. Kohei Hori (Harmonic drive systems inc.)
   The Contribution to planetary Gear Drive Technology

1. Mechanical Remodeling Simulation for Cancellous Bone Using Digital Image-Based Model
   Taiji Adachi, Department of Mechanical Engineering Faculty of Engineering, Kobe University, Ken-ichi Tsubota, Division of Computer and Information Advanced Computing Center, The Institute of Physical and Chemical Research (RIKEN) and Yoshihiro Tomita, Department of Mechanical Engineering Faculty of Engineering, Kobe University
2. Kinematical Analysis of Bi-Articular Muscles for Restoring Locomotions by FES
   Takehiro Iwami, Dept of Control and Information Eng., Turuoka National college of Technology, Kazuto Miyawaki, Akita Prefectual Technology Center and Goro Obinata,　Graduate school of Engineering, Nagoya University
3. An Investigation of Fatigue Crack Gro with Mechanism on the Basis of Observation with AFM and SEM (1st Report, Examination from Striation Formation in Single Crystals of Fe-3.2% Si Alloy with (110)[001] Orientation)
   Yasuji Oda, Faculty of Engineering, Kyushu University, Yoshiyuki Furuya, Materials Engineering Laboratory, National Institute for Materials Science, Hiroshi Noguchi, Faculty of Engineering, Kyushu University and Kenji Higashida, Faculty of Engineering, Kyushu University
4. Multi-axial Constitutive Equations of Polycrystalline Shape Memory Alloy (1st Report, Modeling and Formulation)
   Masataka Tokuda, Deportment of Mechanical Engineering, Mie University, Men Ye, Deportment of Mechanical Engineering, Mie University, Bourt Bundara, ETRA33, Slovenia and Petr Sittner, Institute of Physics, Academy of Sciences of Czech Republic
5. Mechanism of Superlong Fatigue Failure in the Regime of N>10 7(10 to the Seventh Power) Cycles and Fractography of the Fracture Surface
   Yukitaka Murakami, Department of Mechanical Engineering Science, Kyushu University, Toru Ueda, Graduate School of Engineering, Kyushu University, Tetsushi Nomoto, Nagasaki Shipyard and Machinery works, Mitsubishi Heavy Industry Ltd. and Yasuo Murakami, Corporate Research and Development Center, NSK Ltd.
6. Transition and Model Structure of Oscillatory Marangoni Convection in Liquid Bridge
   Hiroshi Kawamura, Tokyo University of Science, Yoshihisa Ono, Mitsubishi Heavy Industries and Ichiro Ueno, Tokyo University of Science
7. A Method for Analyzing Heterogeneity Degree in Diffusion Process
   Takemi Chikahisa, Division of Mechanical Science Hokkaido Univ., Ryo Yuyama, Division of Mechanical Science Hokkaido Univ., Yukio Hishinuma, Division of Mechanical Science Hokkaido Univ.
8. Heat Transfer Enhancement Mechanism in Rectangular Channels with V-and Λ-shaped Ribs
   Sadanari Mochizuki, Department of Mechanical Systems Engineering, Tokyo University of A & T, Robert Kiml, Department of Mechanical Systems Engineering, Tokyo University of A & T and Akira Murata, Department of Mechanical Systems Engineering, Tokyo University of A&T
9. Steady Flow and Stability Analyses of Cavitation in Finite Blade Count Impeller
   Hironori Horiguchi The University of Tokushima, Faculty of Engineering, Department of Mechanical Engineering, Fabien Wahl, SNECMA, Division Moteurs-fusees, Direction Grosse Propulsion a Liquides (France), Satoshi Watanabe, Kyushu University of Mechanical Engineering, Department of Mechanical Engineering Science and Yoshinobu Tsujimoto, Osaka University, Graduate School of Engineering Science, Department of Science and Human Science, Division of Mechanical Science
10. Perforation of Radial Liquid Sheet Induced by Laminar-Turbulent Transition
    Tatsuro Wakimoto, Department of Mechanical Engineering, Osaka City University and Department of Mechanical Engineering, Tsuneo Azuma Osaka City University
11. Coordinated Transportation by Two Nonholonomic Mobile Robots based on Decentralized Control
    Kazuhiro Kosuge, Tohoku Univ., Tomohiro Oosumi, Mitsubishi Motors Co., Kunihiko Chiba, Denso Co. and Manabu Satou, Sony Co.
12. A Study on Countermeasures against Wind-Induced Cable Vibration in Cable-Stayed Bridge by Changing Vibration Modes
    Ryuji Nakano, Kajima Technical Research Institute, Shigehiko Kaneko, The Universty of Tokyo and Rryuta Katamura, Kajima Technical Reseach Institute
13. Nonlinear Analysis of a Parametrically Excited Cantilever Beam (Effect of the Tip Mass on Stationary Response)
    Hiroshi Yabuno, University of Tsukuba, Institute of Engineering Mechanics and Systems, Yoshiro Ide, NSK Ltd., Bearing Design Technology Dept. and Nobuharu Aoshima, University of Tsukuba, Institute of Engineering Mechanics and Systems
14. An Experimental Optical Three-Axis Senor for Micro Machines
    Masahiko Ohka, Shizuoka Institute of Science and Technology, Isamu Higashioka, Mitsubishi Electric Corporation Nagoya Works, Hisanori Kabeshita, Hitachi Information & Energy Systems and Yasunaga Mitsuya, Nagoya University
15. Development of Producibility Evaluation Method; PEM (Comprehensive Quantitative Producibility Evaluation for Processed and Assembled Parts)
    Toshijiro Ohashi, Hitach Ltd., Shoji Arimoto, Hitachi Ltd, Minoru Iwata, The Japan Machinery Federation and Seiji Miyakawa, Formerly Hitachi Ltd.

1. Susumu Kudo, Shibaura Institute of Technology
   A Study of the Biomechanics of Vascular Endothelial Cells
2. Tomonaga Okabe, Smart Structure Research Center, National Institute for Advanced Industrial Science and Technology
   Micro Fracture Mechanics for Ceramic Matrix Composites
3. Shin-ichi Komazaki, Muroran Institute of Technology
   Research on Material Degration Mechanisms and Life Prediction of Heat Resistant Materials Used in Advanced High-Temperature Components
4. Koji Sasaki, Mechanical Engineering Research Laboratory, Hitachi Ltd.
   Study of Residual Stress Analysis Method for Plastic or FRP Structures
5. Keiko Nakatani, Department of Aerospace Engineering, Graduate School, Osaka Prefecture University
   Atomistic Simulation on Mechanical Properties and Fracture Mechanism of Amorphous Meta
6. Masatoshi Kureta, Japan Atomic Energy Research Institute
   Measurement of Void Fraction in Subcooled-Boiling Flow Using Neutron Radiograph
7. Toshio Shudo, Musashi Institute of Technology
   Analysis of Influence of Cooling Loss and Degree of Constant Volume on Thermal Efficiency in a Hydrogen Combustion Engine
8. Yuji Nakamura, Nagoya University, Graduate School / School of Engineering
   Study of Gravity Effects on spontaneous Ignition of Irradiated Solid Fuel
9. Kazuyoshi Fushinobu, Tokyo Institute of Technology
   Conjugate Thermal and Electrical Phenomena in Semiconductor Devices
10. Takashi Kubo, Hitachi, Ltd. Mechanical Engineering Research Laboratory
    A Study of Turbulent Jet Diffusion with Competitive-Consecutive Reaction
11. Tetsuya Kogaki, National Institute of Advanced Industrial and Science Technology
    Research on Accurate Numerical Simulation Methods for Turbulent Flow Fields with Complex Geometry
12. Takashi Shimada, National Institute of Advanced Industrial Science and Technology
    Heat and Mass Transfer across Gas-Liquid Interface
13. Tomoya Houra, Department of Environmental Technology Graduate School of Engineering Nagoya Institute of Technology
    Study of Quasi-Coherent Structures in Turbulent Boundary Layer Subjected to Adverse Pressure Gradient
14. Takanori Emaru, Graduate School of Engineering, Hokkaido University
    Research on Estimating the Smoothed Value and the Differential Value of the Sensor Inputs
15. Mami Tanaka, Tohoku UNIV.
    Active Tactile Sensing Using Functional Materials
16. Shinji Tamura, Tokyo Institute of Technology
    Random Vibration Analysis of Nonlinear Systems Using the Finite Difference Method
17. Tsutomu Nshigaki, Graduate School of Science and Engineering, Tokyo Institute of Technolog
    Research on Vibration Control of Flexible Structures Using  Pizoelectrie Film Sensors/Actuators
18. Tomohiro Suzuki, Toyota Central R&D Labs., Inc.
    A Study on Pitting Strength Analysis and Life Estimation Method of Carburized Gear Steel
19. Toshiharu Miwa, Hitachi Ltd., Production Engineering Research Laboratory
    Study on Improvement of Removal Rate in Silicon Wafer Dicing
20. Yasuhiro Yoshino, Faculty of Engineering, Iwate University
    Study on Hardness and Tirbological Properties for Metals and Plastics at Cryogenic Temperatures
21. Katsuhiko Kimura, Hitachi, Ltd
    Development of High-speed and Low-vibration Actuator for Optical Dise Drives
22. Haruhiko Kohno, Keio UNIV
    Development of High-Resolution FEM Scheme for Free Surface Coupled with Magnetic Fields
23. Akihiro Koga, Toshiba Corporation
    Development of Electrostatic Micro Actuator for Ultra Small Camera
24. Hideki Kobayashi, Toshiba corp.
    Development of Life Cycle Planning Method for Eco-design
25. Takahide Nagahara, Hitachi Industries Co., Ltd. Research & Development Laboratory
    Development of the Predicting Technique of Air Entraining and Submerged Vortices and the Estimating Technique of Vonter Strength in Pump Suction Intakes
26. Koutaro Fujimura, Mitsubishi Heavy Industries, Ltd.
    Pollution Minimum Combustion Technology of VR Fired Boiler
27. Katsumasa Miyazaki, Hitachi, Ltd.
    Development of the Evaluation Method of Structural Integrity of Piping with a Defect for Nuclear Power Plants
28. Ayumu Miyajima, Hitachi, Ltd., Mechanical Engineering Research Laboratory
    Development of Fuel-spray Pattern Control Methods and injection Device for Gasoline Direct Injection Engines
29. Chikashi Murakoshi, Micron Machinery Co.
    Precision OD/ID Centerless Match Grinding
30. Hiroyuki Mori
    Development of Lead-free Swash-plate of Swash-plate Type Compressor for a Vehicle Air Conditioner

1. Endless Bar Rolling System
   Susumu Ohkawa, Plant Engineering Division, NKK Corporation, Makoto Doi, Tsu Research Labs., Hiromasa Hayashi, Applied Technology Research Center, NKK Corporation, Yoshihiro Hirase, Materials & Processing Research Center, NKK Corporation and Yuki Sugawara, Engineering Division, NKK Corporation
2. Development of CO2 Heat Pump Water Heater for Residential Use
   Michiyuki Saikawa, Central Research Institute of Electric Power Industry, Katsumi Hashimoto, Central Research Institute of Electric Power Industry, Masahiko Itoh,　Denso　Corporation, Hisayoshi Sakakibara, Denso Corporation　and　Tomoaki Kobayakawa, Tokyo Electric Power　Company
3. Development of 7 axes’s CNC Thread Rolling Machine
   Toshinaka Shinbutsu, Nissei Co., Ltd., Shuichi Amano, Nissei　Co., Ltd., Minoru Yoshinaga, Nissei Co., Ltd. and Kenji Itoh, Nissei Co.,　Ltd.
4. Study and Development of the Torque Compensation Cam
   Masao Nishioka, Nishioka Mechanism Laboratory
5. Development of Water-Lithium Bromide Low-Temperature Absorption Refrigerating Machine
   Akira Nishiguchi, Mechanical Engineering Research Laboratory, Hitachi Ltd., Shuichiro Uchida,　Refrigerating-Heating Division, Hitachi　Ltd., Tomihisa Ouchi,　Hitachi Ltd. (former), Daisuke Hisajima, Power & Industrial　Systems, Hitachi, Ltd. and Katsumi Mabuchi Hitachi Research　Laboratory, Hitachi, Ltd.
6. Development and Construction of World Largest 360MW PFBC Having Hexagon Shaped Furnace
   Hironori Hatazaki, Thermal Power Department, Kyushu　Electric Power Co., Inc, Hidekatsu Takayama, Nishinippon　Environmental Power Co., Inc, Takeshi Matsuo, Kyushu　Electric Power Co., Inc, Karita Thermal Power Station　Ishikawajima-Harima Heavy Industries Co., Ltd, Jyunichi　Hamanaka, Ishikawajima-Harima Heavy Industries Co., Ltd and Sakae Ando, Ishikawajima-Harima Heavy Industries Co., Ltd
7. Development of Superplasticity Copper Alloy and New Forging Method and its Application to Mass Production
   Sei Miura, Sojo University, Faculty of Engineering, Dept. of Mechanical Engineerring, Katsuaki Nakamura, TOTO Ltd., New Product Business Department No.1, Nomuyuki Ashie, TOTO Ltd., Material Engineering Research Department, Ryuji Matsubara, TOTO Ltd. Material Engineering Research Department and Hiroshi Azuma, TOTO Ltd. New Product Business Department No.1
8. Development of a Battery-Voltage-Driven Fuel Injector for Direct-Injection Gasoline Engines
   Makoto Yamakado, Hitachi, Ltd., Mechanical Engineering Research Laboratory, Motoyuki Abe, Hitachi, Ltd., Mechanical　Engineering Research Laboratory, Yuzo Kadomukai, Hitachi, Ltd., Mechanical Engineering Research Laboratory, Hiromasa Kubo, Hitachi, Ltd., Automotive Products Division and Yasunaga Hamada, Hitachi Car Engineering, Ltd

1. Masatoshi Iwamoto, Faculty of Engineering, Tohoku Gakuin UNIV.
   Practical Educating Activities at Sendai Science Museum Using “BontenMaru”, a Self-contained Robot Kit for Children
2. Mechanical Engineering Design Projects Instructors, Tokyo Institute of Technology, Okuma Masaaki, Tokyo Institute of Technology (Representative of the Instructors)
   A New Method of Mechanical Engineering Design Education “Mechanical Engineering Design Projects”
3. Takashi Owa, Toshiba Research Consulting Corporation
   Engineering Education in Companies and Collaboration with Universities
4. Takaharu Kuroda, Kisarazu National College of Technology, Shimaho Matsumura, Kisarazu National College of Technology, Teruyuki Daitoh, Kisarazu National College of Technology, Hideo Takahashi, Kisarazu National College of Technology and Tadateru Ishide, Kisarazu National College of Technology
   The Teaching Cases in Practice to Foster The Engineers Having Creation and Active Behavior
5. Masashi Shimizu, Tokyo Institute of Technology, Graduate School of Information Science and Engineering
   International Project to increase student’s creativity and internationality
6. Yutaka Shimoyama, Hachinohe Odate J.H.S
   Renovating Junior High School Education by “the Robot Contest”
7. Bunya Tadano, Japan Techno-Economic Society
   Find What you like!—the Practice of Techno-Scientific Education for Children
8. Eiichi Hirano, Tagawa Technical High School
   Creation of a Reliable school though the Teaching of student’s Creativity and Handicraft
9. Shuichi Fukuda, Tokyo Metropolitan Institute of Technology
   Global Project Based Learning between Japan and US
10. Saburo Matunaga, Dept. of Mechanical and Aerospace Engineering, Tokyo Institute of Technology and Shinichi Nakasuka, Dept. of Aeronautics and Asronautics, University of Tokyo
    University Small Satellite Educational Development, Launch, and Operation

1. Chuichi Sato,
   for the Development of Manufacturing Engineering for Mass-Production of Rolling Bearings
2. Tadashi Tanaka (NDC Co., Ltd.)
   for the Research and Development of High Performance Plain Bearings
3. Hiromichi Yanagihara (Power Train Engineering Div.2, Higashifuji Technical Center, Toyota Motor Corporation)
   for the Development of Combustion process for clean exhaust emissions in diesel engines

1. Emotional Communication between Humans and the Autonomous Robot WAMOEBA-2 (Waseda Amoeba) which has the Emotion Model
   Tetsuya Ogata, School of Science and Engineering, Department of Mechanical Engineering, Waseda University and
   Shigeki Sugano, School of Science and Engineering, Department of Mechanical Engineering, Waseda University
2. Designing Pre-Freezing and Freezing Process of Biological Tissues
   Ryo Shirakashi, Institute of Industrial Science, The University of Tokyo and Ichiro Tanasawa, Department of Mechanical Engineering, College of Engineering, Nihon University
3. Fast signal predictions of noised signals in eddy current testing
   Haoyu Huang, Institute of Fluid Science, Tohoku University, Hiroyuki Fukutomi, Central Research Institute of Electric Power Industry and Toshiyuki Takagi, Institute of Fluid Science, Tohoku University
4. Prediction of Electromigration Failure in Bamboo Lines
   Kazuhiko Sasagawa, Hirosaki University,
   Kazushi Naito, Hitachi, Ltd., Masumi Saka, Tohoku University and Hiroyuki Abe, Tohoku University
5. Mixed-Phase Simulation with Fracture-Path Prediction Mode Using Moving Finite Element Method Based on Delaunay Automatic Mesh Generation
   Toshihisa Nishioka, Kobe University of Mercantile Marine, Hiroyuki Tokudome, Ishigaki Co., Ltd. and Masahiro Kinoshita, Toshiba Information Equipment Co., Ltd.
6. A New Method for Simultaneous Measurement of Temperature and Velocity Maps by Magnetic Resonance Imaging
   Kuniyasu Ogawa, Department of Mechanical Engineering, Faculty of Science and Technology, Keio University, Makoto Tobo, Power Plant Engineering Section No.1, Power Systems Project Engineering Department, Power Systems Headquarters, Mitsubishi Heavy Industries, Ltd.,
   Norio Iriguchi, Division of Medical Product Promotion, Asahi Kasei Corporation, Shuichiro Hirai, Research Center for Carbon Recycling and Utilization, Tokyo Institute of Technology and Ken Okazaki, Department of Mechanical and Control Engineering, Tokyo Institute of Technology
7. Local Flame Structure of a H2-Air Turbulent Premixed Flame
   Mamoru Tanahashi, Department of Mechanical and Aerospace Engineering, Tokyo Institute of Technology, Toshio Miyauchi, Department of Mechanical and Aerospace Engineering, Tokyo Institute of Technology, Yuzuru Nada, Graduate School, Tokyo Institute of Technology (Presently Nippon Steel Corporation) and Yukinobu Imamura, Graduate School, Tokyo Institute of Technology (Presently Mitsubishi Electric Corporation)
8. Numerical Simulation of Particle-Laden Plasma Flow in a Pipe Under an RF Electromagnetic Field
   Takehiko Sato, Institute of Fluid Science, Tohoku University and Hideya Nishiyama, Institute of Fluid Science, Tohoku University
9. Effects of Contamination on Gas Dissolution Process of a Spherical Rising Gas Bubble in Water
   Fumio Takemura, Graduate School of Frontier Sciences, The University of Tokyo and Akira Yabe, Mechanical Engineering Laboratory, National Institute of Advanced Industrial Science and Technology, Ministry of Economy, Trade and Industry
10. A Study on REMPI as a Measurement Technique for Highly Rarefied Gas Flows (Analyses of Experimental REMPI Spectra in Supersonic Free Molecular Flows)
    Hideo Mori, Nagoya University, Toshihiko Ishida, Nagoya University, Yoshinori Aoki, Hitachi, Ltd. and Tomohide Niimi, Nagoya University
11. Optimum Trajectory Planning Method for a System That Includes Passive Joints (1st Report, Proposal of a function approximation method)
    Atsushi Imadu, Research Laboratory, Yasukawa Electric Corporation and Kyosuke Ono, Department of Mechanical and Control Engineering, Tokyo Institute of Technology
12. New Method to Evaluate unknown Parameters in a Nonlinear Partial Differential Equation with some Constraints (1st Report, General Description of Problem and Solving method)
    Toshiko Odaka, ex Hitachi Ltd. and Katsuyuki Tanaka, Department of Mechanical System Engineering, The University of Shiga Prefecture
13. A Model-Based Space Teleoperation System Using Mixed Force and Motion Commands
    Yuichi Tsumaki, Hirosaki University and Masaru Uchiyama, Tohoku University
14. Mechanical-Chemical Finishing Using a Lapping Stone Including Microcapsules
    Toshiyuki Enomoto, Ricoh Company, Ltd., Yutaka Shimazaki, Ricoh Company, Ltd., Yasuhiro Tani, University of Tokyo, Kei Etoh, Toppan Forms Co., Ltd., Hisano Higurashi, Toppan Forms Co., Ltd., Yukio Yamaguchi, Noritake Co., Limited and Yasuaki Sakai, Noritake Co., Limited
15. Concave Conical Gear
    Ken-ichi Mitome, Faculty of Engineering, Yamagata University

1. Development of Helical Compressor
   Eiichi Aikawa, Tetsuo Fukuda, Takayoshi Fujiwara, Takuya Hirayama and Satoshi Oyama, Toshiba Carrier Corporation.
2. Development of a Low Emission Direct Injection Gasoline Engine
   Senji Kato, Mutsumi Kanda, Tatsuo Kobayashi and Masanori Sugiyama, Toyota Motor Corporation, Makoto Koike, Toyota Central R&D Labs., INC.
3. Development of High-Precision Glass-Molding-Press Machine
   Masahide Katsuki, Kazunori Urushibata, Toshihisa Kamano, Hirotaka Masaki and Isao Matsuzuki, Toshiba Machine Co., Ltd.
4. Half-Toroidal Continuously Variable Transmission
   Akio Kawaguchi, Jatco Trans Technology Ltd., Toshiaki Takada and Masaki Nakano, Nissan Motor Co., Ltd., Hisashi Machida NSK Ltd., Hitoshi Hata, Idemitsu Kosan Co., Ltd.
5. Development of Technologies Targeting Zero Emissions for Gasoline Engines
   Masaharu Kinoshita, Kimiyoshi Nishizawa, Akio Iwamoto, Takashi Aramaki and Shinji Yamamoto, Nissan Motor Co., Ltd.
6. Development of the High-Power, High-Speed Rotation X-ray CT System
   Tomiya Sasaki, Yasuhiro Seki, Hisashi Tachizaki, Koichi Muraki and Makoto Nakano, Toshiba Co.
7. Fast and Precise Head-Positioning Technology for Hard Disk Drives
   Takashi Yamaguchi and Masahito Kobayashi, Mechanical Engineering Research Laboratory, Hitachi, Ltd., and Hidehiko Numasato, Shozo Saegusa, and Isao Kobayashi, Data Storage and Retrieval Systems Division, Hitachi, Ltd.
   FAX: 81-298-32-2803, TEL: 81-298-32-4111 ex. 6230
8. Development of Ultra High Head Large Capacity Pump-Turbines for Pumped Storage Power Plants with More Than 700m Head
   Shigenori Watanabe, Tokyo Electric Power Company, Kiyoshi Matsumoto, Toshiba Corporation, Kazuo Niikura, Hitachi, Ltd. Yoshihiro Iwasaki, Mitsubishi Heavy Industries, Ltd.

1. Takuji Koike, Department of Mechanical Engineering, Tohoku University
   Research on dynamic characteristics of the middle ear and development of optimum method of middle ear surgery by using the finite-element method
2. Satoshi Izumi, Department of Mechanical Engineering, School of Engineering, University of Tokyo
   The investigation of atomic-scale elastic properties of silicon and its combination with the continuum theory
3. Kazuhiro Ogawa, Tohoku University
   Study on Nondestructive Evaluation of Degradation in Thermal Barrier Coatings by Means of Impedance Spectroscopy Technique
4. Katsuyuki Kida, Osaka University
   Crack growth under rolling contact fatigue in Si3N4 ceramic ball bearings
5. Yukio Miyashita, Nagaoka University of Technology
   Fatigue Crack Growth Behavior of Structural Ceramics
6. Kiyoshi Saito, Waseda University
   Study on the characteristics of an absorption refrigerator driven by waste heat
7. Masahiko Shibahara, Osaka University
   Quantum Molecular Dynamics Study on Light-to-Heat Absorption Mechanism
8. Daisuke Segawa, Osaka Prefecture University
   Experimental studies on Droplet Combustion utilizing Microgravity Environment and Laser Diagnostics
9. Takeshi Hashizume, Mitsubishi Motors Corporation
   Research on Emission Reduction Using Multiple Stage Diesel Combustion
10. Hiroaki Suzuki, The University of Tokyo
    Development of an intelligent nozzle equipped with an array of miniature actuators for jet control
11. Motomu Nakashima, Graduate School of Science and Engineering, Tokyo Institute of Technology,
    Study of Two-Joint Dolphinlike Propulsion Mechanism
12. Nobuhiro Yamanishi, University of Tokyo, School of Engineering; Research fellow of JSPS (From March 16) National Space Development Agency of Japan
    Research on the dynamics of gas-surface interaction
13. Shigeru Yonemura, Institute of Fluid Science, Tohoku University
    Research on Cooling of a Ultra-High Density Plasma for X-Ray Laser Source
14. Kazuhiko Adachi, Department of Mechanical Engineering, Faculty of Engineering, Kobe University
    Research on Simultaneous Optimum Design of Structure and Control Systems
15. Tsuyoshi Inoue, Nagoya University
    Internal Resonance Phenomena in Rotor Systems
16. Nobukatsu Okuizumi, The Institute of Space and Astronautical Science
    Research on Vibrations of Hysteretic Systems Subjected to Harmonic Excitation
17. Naoki Sugano, Kobe Steel, Ltd.
    A Study on the Simulation Method of Flexible Multibody Systems
18. Kiwamu Ashida, Institute of Mechanical Engineering Systems, National Institute of Advanced Industrial Science and Technology (AIST), Independent Administrative Institution (IAI)
    Study on Nano-machining Process Using Mechanism of a Friction Force Microscope
    Jun Watanabe, Nissan Motor Co., Ltd.
    A Study on Traction Characteristics of Toroidal CVT for Automobile
19. Shinichi Warisawa, Graduate School of Engineering, The University of Tokyo
    Research on State Visualization and Recognition for Water Jet Cutting
20. Takahiko Uematsu, Elionix, Inc.
    Development of a hardness tester in high reliability super minute load domain
21. Katsuyuki Endo, Fukushima Technology Centre
    Development of a portable roundness measurement machine based on 3-point method
22. Masanori Ozawa, System Engineering Laboratories, Corporate Research and Development Center, Toshiba Corporation
    Development of a Methodology for Design Information Sharing and Early Performance Evaluation on Product Development Processes
23. Ichiro Kawabuchi, Tech Experts, Inc.
    A Study on a Leg Mechanism with a Terrain Adaptive Function for a Biped Walking Machine
24. Shinji Kubo, Japan Atomic Energy Research Institute
    Development of high density heat transport technology of thermal energy produced by nuclear reactors
25. Kenjiro Goda, Mechanical Engineering Research Laboratory, Hitachi, Ltd.
    Development of Monorail dynamic simulator using multi-body dynamics method
26. Takahiro Suzuki, Corporate Research & Development Center, Mechanical Systems Laboratory, Toshiba Corporation
    Development of High-speed Paper Feeding Device
27. Naotaka Tanaka, Mechanical Engineering Research Laboratory, Hitachi, Ltd.
    Quantitative evaluation method of interface delamination in IC packages
28. Hiroshi Takahashi, Toshiba Corporation
    Development of A Rotating Machine Using 5-axis Active Flat Shaped Magnetic Bearings
29. Hiroshige Takano, Ebara Corp., Hanoi Office
    Development of a new hydraulic simulation system for operation control
30. Junichi Tamamoto, Mechanical Engineering Research Laboratory, Hitachi, Ltd.
    Development of Gap-control System for Paper-sheet Transportation
31. Noriyuki Hayashi, Mitsubishi Heavy Industries, Ltd.
    Study on traction drive for speed increaser of wind turbine